{"status":"ok","message-type":"work-list","message-version":"1.0.0","message":{"facets":{},"total-results":28802,"items":[{"DOI":"10.1109\/ipemc.2006.297170","title":["Implementation of a Shunt-Series Compensator for Nonlinear and Voltage Sensitive Load"]},{"DOI":"10.1109\/icse.1999.841002","title":["Using the ASTRAL model checker to analyze Mobile IP"]},{"DOI":"10.4028\/0-87849-449-9.129","title":["Fabrication of HfO<sub>2<\/sub> Thin Film on Si Substrate by Double-Pulse Excitation PLD"]},{"DOI":"10.4028\/0-87849-440-5.1389","title":["Reliability Evaluation of Hydrothermal Crystallization on Plasma-Sprayed HA Coatings by the Weibull Model"]},{"DOI":"10.4028\/0-87849-961-x.585","title":["Comparison of Validity between WST-1 and MTT Test in Bioceramic Materials"]},{"DOI":"10.4028\/0-87849-958-x.200","title":["Goodness-of-Fit of Time Series Model for the Storage of Water in Agricultural Reservoir"]},{"DOI":"10.4028\/0-87849-421-9.729","title":["Cutter Optimal Selection of CAPP System Facing to the Modern Manufacture"]},{"DOI":"10.4028\/0-87849-415-4.1781","title":["Development of New-Type Similar Materials of Geomechanics Models Test for Geotechnical Engineering"]},{"DOI":"10.4028\/0-87849-473-1.510","title":["A New Model for Simulating AC and Surge Properties of ZnO Varistors Based on Microstructural Characteristics"]},{"DOI":"10.4028\/0-87849-425-1.347","title":["Observation of Free Carrier Redistribution Resulting from Stacking Fault Formation in Annealed 4H-SiC"]},{"DOI":"10.4028\/0-87849-410-3.1622","title":["Effects of Setting Liquid on \u03b1-Calcium Phosphate-Tetracalcium Phosphate Bone Cement"]},{"DOI":"10.4028\/0-87849-410-3.1327","title":["Synthesis of Aluminum Titanate Solid Solution by Solid State Reaction of Fine Commercial Al<sub>2<\/sub>O<sub>3<\/sub>, TiO<sub>2<\/sub> and MgO Powders"]},{"DOI":"10.4028\/0-87849-431-6.507","title":["A Study on Thermal Stabilization of Spent Foundry Sand"]},{"DOI":"10.4028\/0-87849-969-5.672","title":["Application of the White\/Monochromatic X-Ray \u03bc-Diffraction Technique to the Study of Texture and Triaxial Strain at the Submicron Level"]},{"DOI":"10.4028\/0-87849-992-x.309","title":["Real Time Neutron Diffraction Studies of Apatite Glass Ceramics"]},{"DOI":"10.1109\/icee.2008.4585110","title":["A New Transmission System for the Advanced Satellite Broadcast"]},{"DOI":"10.1109\/icee.2008.4585187","title":["On De-Embedding Phase for High Speed Connectors"]},{"DOI":"10.1109\/icee.2008.4585160","title":["A Study on Adaptive Modulation of Pre-coded OFDM combined with Error Correcting Code"]},{"DOI":"10.1109\/pcee.2004.1335613","title":["A parallel hardware-software system for signal processing algorithms"]},{"DOI":"10.4028\/0-87849-423-5.85","title":["Studies on the Preparation, Characterization and Corrosion Behaviour of Injection Molded 316L Steel Electrochemically Coated by Poly{trans[dichloro (4-vinylpyridine) ruthenium]}"]},{"DOI":"10.1109\/isic.2007.4359568","title":["Development of Operator Support System for Rotary Crane with Simultaneous Control of Positioning and Sway Suppression"]},{"DOI":"10.1109\/isdrs.2009.5378295","title":["InGaN\/GaN metal-semiconductor-metal photodetectors with hafnium oxide cap layer"]},{"DOI":"10.4028\/0-87849-981-4.445","title":["TRIP-Assisted Multiphase Steels with Niobium Additions. Microstructures and Properties"]},{"DOI":"10.4028\/0-87849-430-8.314","title":["Real-Time Geometric Error Compensation in Micro Grooving the Workpiece with Large Surface Area"]},{"DOI":"10.4028\/0-87849-959-8.533","title":["Development of 3D Ceramic Photonic Bandgap Structures"]},{"DOI":"10.4028\/0-87849-410-3.10","title":["Molten Salts Synthesis of Relaxor Ferroelectrics PMN-PT Powders"]},{"DOI":"10.4028\/0-87849-419-7.165","title":["Vacuum Carburization of Nanometer Tungsten Powder with Carbon Black"]},{"DOI":"10.2172\/756295","title":["Development of rations for the enhanced survival of salmon; Final Report 1990"]},{"DOI":"10.4028\/0-87849-473-1.176","title":["Low Temperature Sinter-Ability of Microwave Dielectric Ceramics 0.4(Ca<sub>0.61<\/sub>Nd<sub>0.26<\/sub>)TiO<sub>3<\/sub>-0.6(Li<sub>0.5<\/sub>Sm<sub>0.5<\/sub>)TiO<sub>3<\/sub>"]},{"DOI":"10.5555\/artcilenodoiissue","title":["article in issue with no doi"]},{"DOI":"10.4028\/0-87849-425-1.855","title":["Hydrogen-Induced Blistering of SiC: The Role of Post-Implant Multi-Step Annealing Sequences"]},{"DOI":"10.4028\/0-87849-960-1.2931","title":["Effect of State of Stress on the Cavitation Behavior of Al 5083 Superplastic Material"]},{"DOI":"10.4028\/3-908451-43-4.455","title":["Vacancies in Growth-Rate-Varied CZ Silicon Crystal Observed by Low-Temperature Ultrasonic Measurements"]},{"DOI":"10.4028\/0-87849-410-3.2505","title":["Lifetime Control and Prediction of ZrO<sub>2<\/sub>\/CePO<sub>4<\/sub> Composites"]},{"DOI":"10.4028\/0-87849-415-4.183","title":["Measurement of Stress-Optical Coefficients of COC\u2019s with Different Composition"]},{"DOI":"10.4028\/0-87849-978-4.1985","title":["Development of a Fiber-Optic AE Sensor for On-Line Monitoring System"]},{"DOI":"10.4028\/3-908451-22-1.277","title":["Nanotube and Nanorod Synthesis under High Frequency Electric Discharge Assisted Mechanical Milling"]},{"DOI":"10.1109\/sam.2006.1677164","title":["Study of the Human Eye Working Principle: An Impressive High Angular Resolution System with Simple Array Detectors"]},{"DOI":"10.1109\/leos.2009.5343237","title":["Impairment-aware wavelength assignment policies for transparent optical networks"]},{"DOI":"10.4028\/0-87849-433-2.943","title":["Fatigue Damage Mechanism of Nanocrystals in ECAP-Processed Copper Investigated by EBSD and AFM Hybrid Methods"]},{"DOI":"10.4028\/0-87849-439-1.59","title":["The New Top-To-Bottom Method of SiAlON Precursor Preparation by Activation in a Planetary Mill with a High Acceleration"]},{"DOI":"10.4028\/0-87849-470-7.918","title":["Simulation Study on Spool Edge\u2019s Round Angle Effects on Spool Valve Orifice Discharge Characteristic"]},{"DOI":"10.1109\/sam.2006.1677216","title":["Beam Raster Scanning for 2D Flyover SAR"]},{"DOI":"10.4028\/0-87849-463-4.305","title":["Electromagnetic Interference Shielding Properties of Carbon Nanotubes Reinforced Composites"]},{"DOI":"10.4028\/0-87849-418-9.297","title":["An Infinite Elastic Plate Model that Incorporates Periodic Masses"]},{"DOI":"10.4028\/0-87849-470-7.416","title":["Conceptual Design and Simulating Research Based on Virtual Prototype Technology for Parallel Machine Tool (PMT)"]},{"DOI":"10.4028\/0-87849-987-3.3","title":["Design and Development of Lifeboats - Damage Evaluation and Repair of Composite Structures"]},{"DOI":"10.1109\/isic.2007.4359709","title":["Spatial Trajectory Tracking Control of Omni-directional Wheeled Robot Using Optical Flow Sensors"]},{"DOI":"10.4028\/0-87849-982-2.11","title":["Electric Properties of Sr<sub>1-x<\/sub>Bi<sub>2+x<\/sub>Ta<sub>2-y<\/sub>Nb<sub>y<\/sub>O<sub>9<\/sub> Ceramics"]},{"DOI":"10.4028\/3-908158-09-5.67","title":["Nano-Fabricated Aligned Spheroid for Cartilage Tissue Engineering"]},{"DOI":"10.4028\/3-908158-17-6.67","title":["STELLA - STretchable ELectronics for Large Area Applications - A New Technology for Smart Textiles"]},{"DOI":"10.5555\/canary-18","title":["Canary: 33d82210-af15-42e5-821d-fe78e87f6584"]},{"DOI":"10.4028\/0-87849-458-8.756","title":["Design of Ion Beam Figuring Machine for Optical Mirrors"]},{"DOI":"10.4028\/0-87849-425-1.975","title":["Investigation of SiO<sub>2<\/sub>-SiC Interface by High-Resolution Transmission Electron Microscope"]},{"DOI":"10.4028\/0-87849-983-0.308","title":["Quality Improvement of Recycled Aggregate Concrete"]},{"DOI":"10.4028\/0-87849-427-8.1201","title":["Bio-Engineered Mesenchymal Stem Cell-Tricalcium Phosphate Ceramics Composite Augmented Bone Regeneration in Posterior Spinal Fusion"]},{"DOI":"10.4028\/0-87849-989-x.1409","title":["Numerical Simulation of Humidity-Stress in Unsaturated Argillite Tunnel"]},{"DOI":"10.4028\/0-87849-975-x.1013","title":["Testing Polycrystal Plasticity Models on Observed Lattice Rotations and Dislocation Structures"]},{"DOI":"10.4028\/0-87849-428-6.187","title":["Fabrication of Lotus-Type Porous Metals by Continuous Zone Melting and Continuous Casting Techniques"]},{"DOI":"10.4028\/3-908451-51-5.461","title":["Finite Element Modelling of Oxygen Diffusion and Segregation at Interfaces in Ag-MgO Composites: Parametric Studies"]},{"DOI":"10.5555\/test_20051229930","title":["Article 12292005 9:32"]},{"DOI":"10.4028\/0-87849-984-9.73","title":["Particle Size Distribution Analysis of an Alumina Powder: Influence of Some Dispersants, pH and Supersonic Vibration"]},{"DOI":"10.3969\/j.issn.1004-4132.2010.01.019","title":["Person-independent expression recognition based on person-similarity weighted expression feature"]},{"DOI":"10.4028\/0-87849-423-5.133","title":["Microstructure of Plasma-Sintered Aluminum Bronze Powder Compacts"]},{"DOI":"10.4028\/0-87849-980-6.145","title":["Deformation Modes and Anomalous Strengthening of Ni<sub>3<\/sub>X -Type Intermetallic Compounds with the Geometrically Close-Packed Structure"]},{"DOI":"10.4028\/0-87849-975-x.883","title":["The Role of Microstructural Aspects on the Performance of Coarse-Grained Superplastic Al Alloys"]},{"DOI":"10.4028\/0-87849-966-0.558","title":["Electrochemical Characteristics of Si\/Mo Multilayer Anode for Microbattery in MEMS"]},{"DOI":"10.4028\/0-87849-981-4.605","title":["The Effect of Thermomechanical Processing on the Structure and Mechanical Properties of Ni, Nb and V-Bearing HSLA Steels"]},{"DOI":"10.4028\/0-87849-976-8.493","title":["Detecting Damage in a Beam by Static Tests"]},{"DOI":"10.4028\/3-908454-00-x.257","title":["Mechanical and Thermal Properties of Silicon Carbide Composites with Chopped Si-Al-C Fiber Addition"]},{"DOI":"10.4028\/3-908451-29-9.193","title":["Aging Management of Nuclear Power Plants in Korea"]},{"DOI":"10.4028\/0-87849-463-4.209","title":["Mechanical Properties According to Heat Treatment for Gas Turbine Blade Material"]},{"DOI":"10.4028\/0-87849-442-1.29","title":["Effect of Growth Conditions on Cubic Silicon Carbide Crystals Grown from Silicon Solution"]},{"DOI":"10.4028\/0-87849-959-8.1021","title":["Alumina Whiskers Formation during Self-Propagation High-Temperature Synthesis"]},{"DOI":"10.4028\/0-87849-463-4.197","title":["Crystal Structure and Thermoelectric Properties of ReSi<sub>1.75<\/sub> Based Alloys"]},{"DOI":"10.4028\/3-908158-01-x.363","title":["Surface Modification of Nanopowder by Milling under Electric Discharge"]},{"DOI":"10.4028\/0-87849-428-6.4503","title":["The Development of Ultra-Fine High Performance Low Carbon Bainitic Structural Steel"]},{"DOI":"10.4028\/0-87849-441-3.321","title":["Preparation of ZrO<sub>2<\/sub> and Al<sub>2<\/sub>O<sub>3<\/sub> Thin-Films on Stainless Steel by Spray Pyrolysis"]},{"DOI":"10.4028\/0-87849-456-1.1749","title":["A Special Method to Evaluate the Strong Adhesion between Brittle Coating and Ductile Substrate"]},{"DOI":"10.4028\/0-87849-475-8.271","title":["Solidification Microstructure Modelling Using Cellular Automaton Method"]},{"DOI":"10.4028\/0-87849-412-x.1004","title":["A Flat-Panel X-Ray Imaging Module for Medical Imaging and Nondestructive Testing"]},{"DOI":"10.4028\/3-908451-06-x.213","title":["VPD-DC-TXRF for Metallic Contamination Analysis of Ge Wafers"]},{"DOI":"10.4028\/0-87849-427-8.829","title":["Mechanical Properties of VGCF\/PP Nanocomposites by Extrusion and Compression Process"]},{"DOI":"10.4028\/0-87849-966-0.618","title":["Transformation Behavior and Mechanical Properties of an Equiatomic Ti-Ni Alloy with Surface Sulfide Layers"]},{"DOI":"10.4028\/0-87849-456-1.1283","title":["Influence of Extrusion Temperature on Microstructures and Mechanical Properties of Bi<sub>2<\/sub>O<sub>3<\/sub>-Coated Al<sub>18<\/sub>B<sub>4<\/sub>O<sub>33<\/sub> Whisker Reinforced Al Composites"]},{"DOI":"10.4028\/0-87849-427-8.117","title":["Bainite Transformation in Fe-0.34%C-Nb Steels"]},{"DOI":"10.4028\/0-87849-431-6.179","title":["A Study on Boiling Heat Transfer Augmentation of Heating Process Using Ultrasonic Vibrations"]},{"DOI":"10.4028\/0-87849-449-9.77","title":["Defects and Leakage Current in PbTiO<sub>3<\/sub> Single Crystals"]},{"DOI":"10.4028\/3-908451-25-6.53","title":["X-Ray Diffraction Analysis on Crystallite Development of Nanostructured Aluminium"]},{"DOI":"10.4028\/3-908451-30-2.385","title":["Corrosion Behaviors Studied in Self-Assembled Processes of Alkanethiol Monolayers on Polycrystalline Gold Substrates"]},{"DOI":"10.4028\/0-87849-990-3.535","title":["A Web-Based Embedded Sequential Controller with USB 1-N Wireless I\/O Modules"]},{"DOI":"10.2523\/89371-ms","title":["Hi-Tech Footage for IOR in Mature Offshore Field"]},{"DOI":"10.5555\/openai_test2","title":["Access Indicators test 2"]},{"DOI":"10.4028\/0-87849-431-6","title":["Eco-Materials Processing and Design VIII"]},{"DOI":"10.4028\/0-87849-975-x.1131","title":["Solid State Phase Transformations under High Magnetic Fields in a Medium Carbon Steel"]},{"DOI":"10.2172\/92069","title":["Research and recovery of Snake River sockeye salmon. Annual report, 1993"]},{"DOI":"10.4028\/0-87849-415-4.1225","title":["Development of a Reconfigurable Mobile Robot and Precise Position Estimation Based on Extended Kalman Filter"]},{"DOI":"10.4028\/0-87849-440-5.1537","title":["Numerical Evaluation of Crashworthiness of Automotive Sheets"]},{"DOI":"10.5555\/clinicaltrials\/cn01","title":["Clinical Trial Test Using Chinese Trial Number"]},{"DOI":"10.4028\/3-908158-09-5.85","title":["Neurite Development in PC12 Cells on Nanostructured Substrates"]},{"DOI":"10.4028\/0-87849-421-9.1080","title":["Research on Analyzing and Coding Technology of Manufacturing Information Resource Based on Granularity-Structure"]},{"DOI":"10.4028\/0-87849-430-8.59","title":["Optimal Generation of Cutter Path in the Form of Polar Coordinate for NC Machining of Noncircular Contours"]},{"DOI":"10.4028\/3-908451-30-2.163","title":["Investigation on the Crystalline Process of Co-Cu Nanoparticle during the Annealing"]},{"DOI":"10.4028\/0-87849-443-x.407","title":["An Analysis of Strain Path Effects on Static Recrystallisation in Hot Worked Aluminium Alloy AA5052 Using Forward and Reverse Torsion"]},{"DOI":"10.4028\/3-908451-25-6.161","title":["Advanced Surface Hardening Techniques Using Gas Process"]},{"DOI":"10.4028\/0-87849-428-6.3157","title":["Phase Transformation and Microstructures in Ni and Cu Base Ferromagnetic Shape Memory Alloys"]},{"DOI":"10.4028\/0-87849-961-x.961","title":["Comparison of Hard Tissue Formation in Two Porous Hydroxyapatite Scaffolds Treated with Hyaluronic Acid Sodium Salt"]},{"DOI":"10.4028\/3-908451-38-8.21","title":["Microwave-Assisted Hydrothermal Synthesis as a Rapid Route Towards Manganite Preparation"]},{"DOI":"10.4028\/0-87849-410-3.2517","title":["First-Principles Calculations on Crystal Structure and Thermodynamic Properties of Ceramics"]},{"DOI":"10.4028\/0-87849-428-6.4950","title":["Decomposition of Austenite in Fe-25Cr-1N Alloy Produced by Solution Nitriding"]},{"DOI":"10.4028\/0-87849-473-1.202","title":["A Micro Piezoelectric Motor with a Disk-Pivot Structure"]},{"DOI":"10.4028\/0-87849-409-x.103","title":["Phase Equilibria of the Nickel-Aluminium-Chromium System at 1150\u00baC"]},{"DOI":"10.4028\/0-87849-986-5.218","title":["Study on Fuzzy Reliability of Shaft Fixing Grinding Wheel in Internal Grinding"]},{"DOI":"10.4028\/0-87849-992-x.829","title":["In Vitro Mechanical Properties of a Calcium Silicate Based Bone Void Filler"]},{"DOI":"10.4028\/0-87849-415-4.789","title":["Residual Stress in a Polymer-Glued FBG Temperature-Compensated Sensor for Civil Engineering Applications"]},{"DOI":"10.4028\/0-87849-452-9.149","title":["Investigation of Viscosity and Thermodynamic Properties on the Bioleaching Solution with and without Mesophilic Bacteria"]},{"DOI":"10.4028\/0-87849-415-4.839","title":["Electric Signal Detection of a Microfilter-Based Biochip for Immunoassay Using Microbead, Nanogold Particle, and Silver Enhancement"]},{"DOI":"10.4028\/0-87849-959-8.1541","title":["Preparation of Porous Hydroxyapatite Scaffolds"]},{"DOI":"10.4028\/0-87849-959-8.61","title":["Two Methods for the Measurement of Complex Permittivity of Microwave Dielectric Ceramics"]},{"DOI":"10.4028\/0-87849-430-8.343","title":["Design and Numerical Simulation of a Three-Dimensional Nozzle Microstructured Mixer"]},{"DOI":"10.4028\/0-87849-472-3.221","title":["Photocatalytic Cr(VI) Reduction by Anodized TiO<sub>2<\/sub>"]},{"DOI":"10.4028\/0-87849-995-4.454","title":["TGO Growth Behavior with Thermal Fatigue and Its Effect on Fracture Behavior of Thermal Barrier Coatings"]},{"DOI":"10.4028\/0-87849-959-8.473","title":["Chemical Solution Deposition Growth of La<sub>0.7<\/sub>Ca<sub>0.3<\/sub>MnO<sub>3<\/sub> Films and their Electric Pulse Induced Resistance Change Effect"]},{"DOI":"10.4028\/0-87849-430-8.263","title":["Applications of Polishing Technology Using Polymer Particles to Silicon Wafers and Quartz Crystal Wafers"]},{"DOI":"10.4028\/3-908158-01-x.1155","title":["Development and Application of Coated Ceramic Cutting Tools"]},{"DOI":"10.4028\/0-87849-433-2.1199","title":["A Numerical Investigation of Interface Dynamics during Martensitic Transformation in a Shape Memory Alloy Using the Level-Set Method"]},{"DOI":"10.4028\/3-908451-26-4.410","title":["Research on the Composite Slurry Preparation and Rheocasting of Aluminum Alloy"]},{"DOI":"10.4028\/0-87849-421-9.829","title":["Research on Application Technology of Customer-Oriented Product Cooperative Design"]},{"DOI":"10.4028\/0-87849-422-7.695","title":["Biomineralization of Electrospun Nano-HA\/PHB GTR Membrane"]},{"DOI":"10.4028\/0-87849-434-0.557","title":["Texture Evolution of Tertiary Oxide Scale during Steel Plate Finishing Hot Rolling Simulation Tests"]},{"DOI":"10.4028\/3-908451-49-3.331","title":["Calculation of Some Thermodynamic Parameters of Non-Ideal Solutions"]},{"DOI":"10.4028\/0-87849-960-1.1291","title":["Study on Densification Behavior and Microwave Attenuation Characteristics in AlN\/SiC Composites"]},{"DOI":"10.4028\/0-87849-975-x.489","title":["Recrystallization Texture and Microstructure Formation in Heavily Rolled IF Steel"]},{"DOI":"10.4028\/0-87849-425-1.739","title":["Columnar Pore Growth in n-Type 6H SiC"]},{"DOI":"10.4028\/0-87849-432-4.1389","title":["In Situ AFM Observation of Mechanical Behavior of Beta Titanium Alloy in Nano-Indentation Test"]},{"DOI":"10.4028\/0-87849-463-4.773","title":["Effect of Co-Doping Cation on Phase Stability of Zirconia Bioceramics in Hot Water"]},{"DOI":"10.4028\/3-908451-25-6.35","title":["Heat Treatment Behavior of Tungsten Heavy Alloy"]},{"DOI":"10.4028\/0-87849-457-x.713","title":["Immobilization of Bovine Serum Albumin on Titanium through Plasma Polymerization of Allylamine and Crylic Acid"]},{"DOI":"10.4028\/0-87849-968-7.839","title":["Corrosion of New Wrought Magnesium Alloys"]},{"DOI":"10.4028\/0-87849-427-8.245","title":["Mechanics Characteristics and Failure Criteria of Concrete Confined by Lateral Stress after Suffering Cycles of Freezing and Thawing in Seawater"]},{"DOI":"10.4028\/0-87849-450-2.55","title":["Ultrasonic Pulse Velocity for In Situ Measurement of Compressive Strength of Concrete"]},{"DOI":"10.4028\/0-87849-436-7.873","title":["Hydrothermal Synthesis of Hydroxyapatite Powders Using Alkyl Ammonium Bromides as Surfactants"]},{"DOI":"10.4028\/0-87849-434-0.485","title":["Tracing the Goss Orientation during Deformation and Annealing of an FeSi Single Crystal"]},{"DOI":"10.4028\/0-87849-459-6.504","title":["A Fundamental Study on the Digital Recognition of Grinding Wheel"]},{"DOI":"10.4028\/0-87849-442-1.937","title":["Potential Benefits of Silicon Carbide Zener Diodes Used as Components of Intrinsically Safe Barriers"]},{"DOI":"10.4028\/0-87849-448-0.373","title":["Prediction of Welding Distortions of Stainless Steel Ship"]},{"DOI":"10.4028\/0-87849-963-6.197","title":["Regrowth of 3C-SiC on CMP Treated 3C-SiC\/Si Epitaxial Layers"]},{"DOI":"10.4028\/0-87849-448-0.377","title":["Numerical Investigations of Corner Singularities in Cracked Bodies"]},{"DOI":"10.4028\/0-87849-963-6.85","title":["Improved Surface Morphology and Background Doping Concentration in 4H-SiC(000-1) Epitaxial Growth by Hot-Wall CVD"]},{"DOI":"10.4028\/0-87849-432-4.2055","title":["Effects of Nano-Al Doping on Superconductivity and Microstructure of MgB<sub>2<\/sub> Bulk Superconductors"]},{"DOI":"10.4028\/0-87849-960-1.2083","title":["New Piezoelectric Composites-Design, Fabrication and Characterization"]},{"DOI":"10.4028\/3-908451-21-3.67","title":["Mechatronic Systems with Linear Induction Motors of Dampers"]},{"DOI":"10.4028\/3-908451-31-0.1","title":["Dependence of Thermal-Cycling-Induced Deformation on Passivation Morphology in Plastic-Encapsulated Microelectronic Devices"]},{"DOI":"10.4028\/3-908451-21-3.34","title":["Calculation of the Parameters of a Linear Electric Drive"]},{"DOI":"10.4028\/0-87849-963-6.941","title":["Design, Fabrication and Characterization of 1.5 m\u03a9cm<sub>2<\/sub>, 800 V 4H-SiC n-Type Schottky Barrier Diodes"]},{"DOI":"10.4028\/0-87849-448-0.133","title":["Progressive Failure Analysis of Composite Pressure Vessels by Finite Element Method"]},{"DOI":"10.4028\/0-87849-450-2.399","title":["Influence of Surface Topography on Corrosion of Stainless Steel AISI 304 Turned Surfaces with Different Cutting Conditions"]},{"DOI":"10.4028\/0-87849-408-1.215","title":["Improvement of Bake-Hardening Response of Al-Mg-Cu Alloys by Means of Nanocluster Assist Processing (NCAP) Technique"]},{"DOI":"10.4028\/0-87849-970-9.581","title":["Strength Distributions in Ceramic Laminates"]},{"DOI":"10.4028\/3-908158-04-4.127","title":["Use of Electric Discharge Sintering for Elaboration of Diamond Tools"]},{"DOI":"10.4028\/0-87849-465-0.279","title":["Micro Structural Studies On Explosively Clad Cu\/Ss, Br\/Ss and Al\/Ss Plates"]},{"DOI":"10.4028\/0-87849-960-1.3197","title":["Suppression of Anomalous Interface Effects by Localization of Solute Redistribution in Thin Interface Phase-Field Modeling of Solidification"]},{"DOI":"10.4028\/0-87849-473-1.610","title":["Nano-Crystalline Barium Hexaferrite Powders Prepared by Mechanical Alloying Using Acetate Precursor"]},{"DOI":"10.4028\/0-87849-410-3.395","title":["Synthesis and Characterization of (Gd, Y)-Doped Ceria Electrolytes for Solid Oxide Fuel Cell"]},{"DOI":"10.4028\/0-87849-995-4.510","title":["Effect of Thermo-Mechanical Variables on the Dynamic Ferrite Transformation Induced by Hot Deformation in 0.22C-Mn Steel"]},{"DOI":"10.4028\/3-908451-15-9.169","title":["Study on Large Scale Analysis for Infra-Structure"]},{"DOI":"10.4028\/0-87849-960-1.2473","title":["The Electrochemical Characteristics of Mg-Based Alloy Prepared by HT (Heat Treatment) and MG (Mechanical Grinding) for Nickel-Metal Hydride Secondary Batteries"]},{"DOI":"10.4028\/0-87849-961-x.521","title":["Activation of Hydroxyapatite Crystal Growth on the Surface of Biomimetic Synthetic Apatites through Electrical Polarization"]},{"DOI":"10.4028\/0-87849-975-x.737","title":["Anisotropy in Cold Rolling of Single Crystalline Ni<sub>3<\/sub>-Al-Base Intermetallic Alloys"]},{"DOI":"10.4028\/3-908451-55-8.107","title":["Extended 'Five-Stream' Model for Diffusion of Implanted Dopants in Silicon during Ultra-Shallow Junction Formation in VLSI Circuits"]},{"DOI":"10.4028\/0-87849-419-7.549","title":["Investigation of Sintering Behaviors of Steatite Parts Produced by Powder Injection Molding"]},{"DOI":"10.4028\/0-87849-456-1.2092","title":["Joining of SiC Ceramic to High Strength Graphite Using Polysiloxane with Active Additive"]},{"DOI":"10.4028\/0-87849-414-6.205","title":["E7 - New Strain Scanner at HMI - High Q-Resolution for Phase-Sensitive Analysis of Stress Distributions"]},{"DOI":"10.4028\/0-87849-959-8.1313","title":["Ultra-Fine Treatment of SiC Powder and Its Effect on Microstructure and Properties of SiC Ceramic"]},{"DOI":"10.4028\/0-87849-436-7.701","title":["In Vitro Study Bioactivity of HA\/UHMWPE Nanocomposites"]},{"DOI":"10.4028\/0-87849-415-4.855","title":["Plastic Ankle Foot Orthosis for Hemiplegics and Structural Analysis"]},{"DOI":"10.4028\/0-87849-421-9.737","title":["Development of 3D Parameterized Design System for Turbine Compressor Impellers"]},{"DOI":"10.4028\/0-87849-428-6.4391","title":["Microstructure Model for a Dual-Phase Steel"]},{"DOI":"10.4028\/3-908158-01-x.1011","title":["Experimental Study on SHS under High Nitrogen Pressure"]},{"DOI":"10.4028\/3-908158-01-x.905","title":["Hot Explosive Consolidation of WC-AlNi Composites"]},{"DOI":"10.4028\/0-87849-421-9.673","title":["Study on the Tool Path Generation of an Automotive Headlamp Reflector in Ultra-Precision Raster Milling"]},{"DOI":"10.4028\/3-908451-46-9.113","title":["Study of a Metal Gate and Silicon Selective \u201cDry Ash Only\u201d Process for Combined Extension and Halo Implanted Photo Resist"]},{"DOI":"10.4028\/0-87849-963-6.417","title":["Comparison of Electrically and Optically Determined Minority Carrier Lifetimes in 6H-SiC"]},{"DOI":"10.1109\/eumc.1997.632040","title":["An Mmic-based Microwave Sensor For Accurate Clearance Measurements In Aircraft Engines"]},{"DOI":"10.4028\/0-87849-415-4.1861","title":["Development of Accelerated Life Test Method of Hydraulic Pump"]},{"DOI":"10.4028\/0-87849-425-1.547","title":["Relationship between the EPR SI-5 Signal and the 0.65 eV Electron Trap in 4H- and 6H-SiC Polytypes"]},{"DOI":"10.4028\/0-87849-422-7.633","title":["In Vitro Apatite-Forming Ability of Titania Films Depends on Their Substrates"]},{"DOI":"10.4028\/0-87849-960-1.4137","title":["Effect of Heat Treatment Conditions on Tube Hydroformability"]},{"DOI":"10.4028\/3-908454-01-8","title":["New Materials for Extreme Environments"]},{"DOI":"10.4028\/0-87849-466-9.351","title":["Growth and Evaluation of GaN Grown on Patterned Sapphire Substrates"]},{"DOI":"10.4028\/0-87849-442-1.957","title":["Surface Functionalization of SiC for Biosensor Applications"]},{"DOI":"10.4028\/0-87849-978-4.452","title":["High Temperature Crack Growth Behavior of 304 Stainless Steel under Creep and Fatigue Loading"]},{"DOI":"10.4028\/3-908451-57-4.9","title":["Optical Properties of Nanocrystalline YAG:Ce"]},{"DOI":"10.4028\/0-87849-441-3.533","title":["Magnetoimpedance Effect in Fe<sub>89.8<\/sub>Ni<sub>1.5<\/sub>Si<sub>5.2<\/sub>B<sub>3<\/sub>C<sub>0.5<\/sub> Metallic Glass Ribbons"]},{"DOI":"10.4028\/0-87849-960-1.377","title":["Development of Horizontal Reheating System for Semi-Solid Die Casting and Its Microstructure Evaluation"]},{"DOI":"10.4028\/3-908451-31-0.1625","title":["An Ab Initio Study of the Energies of Coherent Interfaces Formed between bcc Iron and Carbides or Nitrides of Transition Metals"]},{"DOI":"10.4028\/0-87849-981-4.131","title":["Influence of Ti on Static Recrystallization in Near Net Shape Steels"]},{"DOI":"10.4028\/0-87849-432-4.1521","title":["Effect of Needling Parameters on Mechanical Properties of C\/C Composites Reinforced by Carbon Cloth"]},{"DOI":"10.4028\/0-87849-428-6.2026","title":["Plasticity in Bulk Metallic Glass Composites Containing Dual Amorphous Phases"]},{"DOI":"10.4028\/3-908451-43-4.559","title":["Properties of Nanostructure Formed on SiO<sub>2<\/sub>\/Si Interface by Laser Radiation"]},{"DOI":"10.4028\/0-87849-410-3.1534","title":["Investigation on the Porous Biomaterial for Bone Reconstruction with Addition of Bio-Mimetic Nano-Sized Inorganic Particles"]},{"DOI":"10.4028\/0-87849-419-7.1473","title":["Oxidation State of Manganese in LiMn<sub>2<\/sub>O<sub>4<\/sub> Powders and Its Effect on Electrochemical Properties"]},{"DOI":"10.4028\/0-87849-423-5.486","title":["Effects of Raw Materials on the Technological Properties of Brick Compositions Using a Statistical Design Approach"]},{"DOI":"10.4028\/3-908158-01-x.462","title":["Rheology of Ceramic Suspensions with Biopolymeric Gelling Additives"]},{"DOI":"10.4028\/0-87849-977-6.367","title":["Detection and Control of Synchro-Operation of Long-Stroke Cylinders in a Deep Ocean Mining Heave Compensation System"]},{"DOI":"10.5555\/testarticle17","title":["Test Article 17"]},{"DOI":"10.4028\/0-87849-459-6.379","title":["Experimental Study on Lapping Force Characteristics of Hard-Brittle Materials in Ultrasonic Vibration Lapping"]},{"DOI":"10.4028\/0-87849-986-5.76","title":["A Study on Surface Generation of Metal-Bonded Diamond Grinding Wheel Dressed by Electro-Contact Discharge"]},{"DOI":"10.4028\/3-908451-43-4.547","title":["Hydrogenated Nanocrystalline Silicon Thin Films Studied by Scanning Force Microscopy."]},{"DOI":"10.4028\/0-87849-433-2.767","title":["Reduction of Stages in Multi-Stage Metal Forming Process Based on Numerical Optimization in Conjunction with FE Simulation"]},{"DOI":"10.4028\/0-87849-992-x.403","title":["Early Cellular Responses of Osteoblast-Like Cells on Acid-Etching and Alkaline Treated Titanium"]},{"DOI":"10.4028\/0-87849-408-1.789","title":["Temperature-Dependent Shear Strain Localization of Aluminium-Lithium Alloy in Uniaxial Compression Using Zerilli-Armstrong and Gradient Plasticity Models"]},{"DOI":"10.4028\/0-87849-958-x.935","title":["Preliminary Study of the Apparatus for Electron Stimulated Desorption of Rare Gas Solids"]},{"DOI":"10.4028\/0-87849-456-1.1185","title":["Study on Micro-Mechanism of Crack Initiation and Propagation Induced by Inclusion in Ultra-High Strength Steel"]},{"DOI":"10.4028\/0-87849-435-9.373","title":["Superplasticity in CP-Titanium Alloys"]},{"DOI":"10.4028\/0-87849-428-6.5001","title":["Processing and Property of Net-Shaped Fe-Based Nanoparticulate Material"]},{"DOI":"10.4028\/0-87849-421-9.440","title":["Prediction and Design of the Optimal Punch Shape for Recess Forging"]},{"DOI":"10.4028\/0-87849-998-9.225","title":["EPD of a Sub Micron HA Powder for Biomedical Applications"]},{"DOI":"10.4028\/0-87849-442-1.603","title":["Reduction of Traps and Improvement of Carrier Lifetime in SiC Epilayer by Ion Implantation"]},{"DOI":"10.4028\/0-87849-462-6.2265","title":["Effect of Different Surface Treatments on Fatigue Life of NiTi Wires"]},{"DOI":"10.4028\/0-87849-428-6.1004","title":["Novel Processing of Porous Titanium Composite for Producing Open Cell Structure"]},{"DOI":"10.4028\/0-87849-962-8.243","title":["Estimation of Selenium Consumption during Selenization of Cu-In Metallic Layer in a Quazi-Closed System"]},{"DOI":"10.4028\/0-87849-413-8.543","title":["Effect of Geometry Factors on Dynamic Fracture Behavior for Mechanical Heterogeneous Welded Joint"]},{"DOI":"10.4028\/0-87849-975-x.839","title":["Experiments and Modelling of ECAE Textures of f.c.c. Polycrystals"]},{"DOI":"10.4028\/0-87849-413-8.631","title":["The Thermal Cyclic Behavior of the TBCs with the MCrAlY Coating Method"]},{"DOI":"10.1109\/ipemc.2006.297124","title":["Effective Load Resistance; A New Method to Evaluate DC\/DC converters Efficiency"]},{"DOI":"10.4028\/0-87849-960-1.3115","title":["Atomic-Scale Computer Simulation of Mixture Precipitation Mechanism for Ni<sub>75<\/sub>Al<sub>x<\/sub>V<sub>25-x<\/sub> Alloy"]},{"DOI":"10.4028\/0-87849-423-5.473","title":["Brazing of Al<sub>2<\/sub>O<sub>3<\/sub> with Rapidly Solidified Melt Spun Ni-Cr-P Alloy Ribbons"]},{"DOI":"10.4028\/0-87849-424-3.269","title":["Microstructural Evolution of Thermal Barrier Coatings during Isothermal Oxidation"]},{"DOI":"10.4028\/0-87849-417-0.151","title":["Modelling of Surface Roughness (Ra and Rq) in the EDM of Reaction-Bonded Silicon Carbide"]},{"DOI":"10.4028\/0-87849-425-1.403","title":["Structure of \u201cStar\u201d Defect in 4H-SiC Substrates and Epilayers"]},{"DOI":"10.4028\/0-87849-978-4.844","title":["Fracture Mechanic Analysis for Package Delamination"]},{"DOI":"10.4028\/3-908451-26-4.779","title":["Effect of Crystal Orientation on Textures of Electromagnetic Stirred Aluminum Alloy"]},{"DOI":"10.4028\/0-87849-432-4.195","title":["Change of Inclusion and Mechanical Properties of Magnesium Alloy during Vacuum Melting"]},{"DOI":"10.4028\/0-87849-978-4.351","title":["A Study on the Contact Behaviors of Infinitely Variable Transmission System with Full Toroidal Shapes of Disks"]},{"DOI":"10.4028\/3-908451-30-2.469","title":["Self-Assembly of Polymer Thin Film on Chemically Patterned Substrate"]},{"DOI":"10.4028\/0-87849-412-x.869","title":["A Study on the Fracture Characteristics of Plasma-Treated Graphite\/Epoxy Laminated Composites"]},{"DOI":"10.4028\/3-908451-41-8.99","title":["Diffusion-Induced Stresses: Theory and Applications"]},{"DOI":"10.4028\/0-87849-456-1.2045","title":["Crack Growth Characteristics of Pure Copper for Smart Stress Memory Patch"]},{"DOI":"10.4028\/0-87849-959-8.891","title":["Coating and Intergrowth of NaX Molecular Sieve Films on Porous Ceramic Paper for Membranes"]},{"DOI":"10.4028\/0-87849-432-4.719","title":["Homogenization Treatment of an Al-Li-Cu-Mg-Mn-Zr Alloy"]},{"DOI":"10.4028\/3-908158-04-4.169","title":["Electrocatalytic Behaviour of Diamond Electrode for Organic Compound"]},{"DOI":"10.4028\/0-87849-457-x.1207","title":["Calcium Phosphate Powder for Cancer Vaccination"]},{"DOI":"10.1109\/isic.2007.4359672","title":["Quaternion-Based Visual Servo Control in the Presence of Camera Calibration Error"]},{"DOI":"10.4028\/0-87849-411-1.117","title":["Relation Between Grain Boundary and Electrical Degradation of ZnO Varistors"]},{"DOI":"10.4028\/0-87849-990-3.175","title":["Injection Molding Measurement and Analysis of a Plastic Part with Changes in Thickness Dimensions and Material Types"]},{"DOI":"10.4028\/0-87849-412-x.1133","title":["Ultrasonic Characterization of Thermal Distribution in Vicinity for a Cylindrical Thermal Lesion in a Biological Tissue"]},{"DOI":"10.4028\/0-87849-442-1.435","title":["Theory of the Stark Effect on the Donor Levels in 4H Silicon Carbide"]},{"DOI":"10.4028\/0-87849-995-4.1074","title":["Electrochemical Characteristics of Nano-Silicon\/Graphite Composite for the Anode Material of Lithium Secondary Batteries"]},{"DOI":"10.4028\/0-87849-466-9.79","title":["Growth and Properties of Stannite-Quaternary Cu<sub>2<\/sub>ZnSnSe<sub>4<\/sub> Thin Films Prepared by Selenization of Sputtered Binary Compound Precursors"]},{"DOI":"10.4028\/0-87849-433-2.289","title":["A Dynamic Damage Model for Uniaxial Compressive Response of AD90 Alumina"]},{"DOI":"10.4028\/0-87849-473-1.806","title":["Hydrothermal Synthesis of Nanosized Mullite Powders"]},{"DOI":"10.4028\/0-87849-423-5.747","title":["The Dimensional Change in the Sintering of a Plain Iron Powder and High-Alloyed Iron Powder Mixtures"]},{"DOI":"10.4028\/0-87849-413-8.727","title":["Failure Analysis of Adhesively Bonded Single Lap Joints Embedded with Metal Component as Part of Fillet"]},{"DOI":"10.4028\/0-87849-421-9.341","title":["Research on High Speed Face Milling Cutter Based on the Model of Stress Field"]},{"DOI":"10.4028\/0-87849-473-1.588","title":["Solid Phase Synthesis and Sintering Properties of Yttrium Iron Garnet"]},{"DOI":"10.1109\/9780470547212.ch11","title":["Incident Field Excitation of TwoConductor Lines"]},{"DOI":"10.4028\/0-87849-415-4.1035","title":["An Evaluation of Low-Cycle Fatigue Property for Sn-3.5Ag and Sn-0.7Cu Lead-Free Solders Using Surface Deformation"]},{"DOI":"10.4028\/3-908451-27-2.223","title":["Micro Catalytic Combustor as a Heat Source for Micro Endothermic Reactors"]},{"DOI":"10.4028\/0-87849-967-9.253","title":["Bone Induction by Controlled Release of BMP-2 from a Biodegradable Hydrogel in Various Animal Species - From Mouse to Non-Human Primate -"]},{"DOI":"10.4028\/0-87849-980-6.111","title":["Utilization of Generalized Chemical Potential Diagrams for Multi-Component Systems in Understanding Interface Stability"]},{"DOI":"10.4028\/0-87849-980-6.449","title":["Interface Behavior in Liquid Phase Impact Diffusion Welding of Aluminum Matrix Composite"]},{"DOI":"10.4028\/0-87849-967-9.607","title":["Fretting Damage of Human Cortical Bone in Transverse Orientation against Titanium"]},{"DOI":"10.4028\/0-87849-439-1.169","title":["Carbothermal Reduction and Nitridation of \u00c7anakkale Origin Kaolin for SiAlON Powder Production"]},{"DOI":"10.4028\/3-908451-26-4.775","title":["Structural Evolution and Deformation Behavior of Extruded AZ91 with Ca Addition in the Semi-Solid State"]},{"DOI":"10.4028\/0-87849-960-1.381","title":["Effect of Be Addition on the Precipitation Behaviors and Mechanical Properties in Al-Cu-Li-Mg-Zr-(Ag) Alloys"]},{"DOI":"10.4028\/0-87849-432-4.1753","title":["Electrochemical Corrosion Behaviors of Ti<sub>2<\/sub>AlNb with Double Glow Plasma Surface Chromized"]},{"DOI":"10.4028\/0-87849-416-2.489","title":["Experimental Study on New Bonding Materials for Developing Nano-Grinding Plates"]},{"DOI":"10.4028\/0-87849-977-6.649","title":["Observation of Scattered Evanescent Waves"]},{"DOI":"10.4028\/3-908451-30-2.37","title":["Electrochemical Pore Etching in n- and p-Type Ge"]},{"DOI":"10.4028\/0-87849-440-5.1345","title":["Leak Behavior of SCC Degraded SG Tubes at a Constant Pressure"]},{"DOI":"10.4028\/0-87849-422-7.1149","title":["Mesenchymal Stem Cell Derived Osteogenic Cells Is Superior to Bone Marrow Aspirate Impregnated Biomaterial Complex in Posterior Spinal Fusion"]},{"DOI":"10.4028\/3-908451-37-x.61","title":["Peculiarities of Discontinuous Precipitation in the Pb-Sn Alloy"]},{"DOI":"10.4028\/3-908158-01-x.1847","title":["SAXS Characterization of Carbon Aerogels for Catalytic Supports"]},{"DOI":"10.4028\/0-87849-431-6.877","title":["Recovery of Silica and Sodium Fluoride from Hexafluorosilicic Acid and Sodium Silicate"]},{"DOI":"10.4028\/0-87849-452-9.75","title":["Biological Transformation of Kimberlite Ores"]},{"DOI":"10.5555\/test_jms_123_article_1","title":["Test article for crossref test journal"]},{"DOI":"10.4028\/0-87849-471-5.39","title":["Enhanced UV Photodetector Responsivity in Porous GaN\/Si(111) by Metal-Assisted Electroless Etching"]},{"DOI":"10.4028\/0-87849-410-3.1448","title":["A Study on the Grinding Performance of Y-TZP\/Al<sub>2<\/sub>O<sub>3<\/sub> Ceramics"]},{"DOI":"10.4028\/0-87849-985-7.727","title":["ECC Observations of Nanostructures Formed by Sliding Wear in Copper"]},{"DOI":"10.4028\/0-87849-428-6.2737","title":["Preparation of Ti<sub>3<\/sub>SiC<sub>2<\/sub> Particulate Reinforced Cu Matrix Composite by Warm Compaction Powder Metallurgy"]},{"DOI":"10.4028\/0-87849-442-1.161","title":["SiC Heteropolytype Structures Grown by Sublimation Epitaxy"]},{"DOI":"10.4028\/0-87849-413-8.615","title":["A New Method for Parameters Estimation of Probabilistic Fatigue Crack Growth Rate Model"]},{"DOI":"10.4028\/0-87849-410-3.1429","title":["Spark Plasma Sintered ZrO<sub>2<\/sub>(Y<sub>2<\/sub>O<sub>3<\/sub>)-Al<sub>2<\/sub>O<sub>3<\/sub>-SrSO<sub>4<\/sub> Self-Lubricating Nanocomposites for High Temperature Tribological Applications"]},{"DOI":"10.4028\/0-87849-429-4.959","title":["Strain Path Effects on Titanium Alloy Timetal-834 under Hot Working Conditions"]},{"DOI":"10.4028\/0-87849-461-8.243","title":["Synthetically Modeling of Thermal Error and Grinding Force Induced Error on a Precision NC Cylindrical Grinding Machine"]},{"DOI":"10.4028\/0-87849-415-4.245","title":["A Novel PDMS Valveless Micropump with a Circular Lightweight Piezo-Composite Actuator"]},{"DOI":"10.4028\/3-908451-43-4.413","title":["Horizontal Versus Vertical Annealing of Silicon Wafers at High Temperatures"]},{"DOI":"10.4028\/3-908158-11-7.187","title":["Development of Multi-Ferroic Actuator\/Sensor Material and Device for Intelligent\/Smart Technology - Basic Design and Experimental Verification"]},{"DOI":"10.4028\/0-87849-419-7.1437","title":["Development of High Performance Multi-Lobe Fluid Dynamic Bearings Using a Sintered Material"]},{"DOI":"10.1109\/isic.2007.4359648","title":["H<inf>\u00bf<\/inf> Controller Design for Linear Systems with Quantized Feedback"]},{"DOI":"10.4028\/0-87849-469-3.17","title":["Modeling of Cracks Crossing an Interface between Dissimilar Elastic Anisotropic Materials"]},{"DOI":"10.4028\/0-87849-413-8.371","title":["Application of Fractional Spline Wavelet in Detection of Abrupt Information from Fault Gear System"]},{"DOI":"10.4028\/0-87849-415-4.1271","title":["Cure Kinetic Behavior of 191<sup>#<\/sup> Unsaturated Polyester Resin Used in Advanced Composites"]},{"DOI":"10.4028\/0-87849-457-x.585","title":["Development of Template-Assisted Electrohydrodynamic Atomization Spraying for NanoHA Patterning"]},{"DOI":"10.1109\/dac.2007.375250","title":["SOC Test Architecture Optimization for Signal Integrity Faults on Core-External Interconnects"]},{"DOI":"10.4028\/0-87849-967-9.629","title":["Tribological Properties of UHMWPE Composites Filled with Nano-Powder of SiO<sub>2<\/sub> Sliding against Ti-6Al-4V"]},{"DOI":"10.4028\/0-87849-960-1.3535","title":["Synthesis and Characterization of ZnO Nanowires Using a Simple PVD Approach without Catalysts"]},{"DOI":"10.4028\/0-87849-966-0.5","title":["Sol-Gel Derived TiO<sub>2<\/sub> Coating for Chemical Protection of Stainless Steel"]},{"DOI":"10.4028\/0-87849-442-1.971","title":["Analysis of Novel Packaging Techniques for High Power Electronics in SiC"]},{"DOI":"10.4028\/3-908451-53-1.145","title":["Mechanical and Fatigue Properties of Cu-Al-Mn Shape Memory Alloys with Influence of Mechanical Cycling on Amplitude Dependence of Internal Friction at Room Temperature"]},{"DOI":"10.4028\/0-87849-462-6.2439","title":["Thermodynamic Processes and Phenomena Induced by High Current Pulsed Electron Beam"]},{"DOI":"10.4028\/0-87849-975-x.1627","title":["Simulation of the Lattice Strains Developed during a Tensile Test on a Multiphase Steel"]},{"DOI":"10.4028\/0-87849-963-6.841","title":["High Field Effect Mobility in Si Face 4H-SiC MOSFET Made on Sublimation Grown Epitaxial Material"]},{"DOI":"10.4028\/0-87849-431-6.1057","title":["Structural and Electrochemical Properties of a Si\/C\/Cu Film Anode Electrode"]},{"DOI":"10.4028\/0-87849-961-x.999","title":["Investigation of Monoclinic Content on Clinically Retrieved Zirconia Heads"]},{"DOI":"10.4028\/3-908158-04-4.61","title":["XRDT and TEM Study of Defects and Polytypism in Natural Moissanite and Synthetic SiC Crystals"]},{"DOI":"10.3969\/j.issn.1004-4132.2010.04.024","title":["Passivity analysis for uncertain stochastic neural networks with discrete interval and distributed time-varying delays"]},{"DOI":"10.4028\/0-87849-458-8.400","title":["Automatic Optical Inspection on TFT-LCD Mura Defects Using Background Image Reconstruction"]},{"DOI":"10.4028\/3-908454-00-x.133","title":["Corrosion of \u03b2-SiAlON in Molten Aluminium, Cryolite and NaCl-KCl Mixture"]},{"DOI":"10.4028\/3-908158-01-x.2105","title":["Oxygen Radicals Occlusion\/Release Behavior of Nanoporous Aluminosilicate, Ca<sub>12<\/sub>Al<sub>14-X<\/sub>Si<sub>X<\/sub>O<sub>33+0.5X<\/sub> (0\u2266X\u22664)"]},{"DOI":"10.4028\/0-87849-971-7.363","title":["Characterization and Catalytic Activity of Poly(4-Vinylpyridine-Co-Divinylbenzene)-Co<sup>2+<\/sup> Complex"]},{"DOI":"10.4028\/0-87849-967-9.109","title":["Tumor Targeting of Plasmid DNA by Dextran Conjugation Based on Metal Coordination"]},{"DOI":"10.4028\/0-87849-436-7.745","title":["Evaluation of Acid-Treated Hyaluronic Acid-Based Hydrogelation"]},{"DOI":"10.4028\/0-87849-423-5.170","title":["The Influence of Al, Cu and P Content on the Magnetic Properties of PrFeCoBNb-Based HDDR Magnets"]},{"DOI":"10.4028\/0-87849-428-6.4428","title":["Effect of Aluminum and Titanium Content on Grain Growth, Texture and Magnetic Properties in 3%Si Non-Oriented Electrical Steel"]},{"DOI":"10.4028\/0-87849-413-8.1273","title":["A Study on Load Analysis and Durability Test Condition of Automobile Brake Pedal"]},{"DOI":"10.4028\/0-87849-959-8.601","title":["Biomimetic Synthesis of CaCO<sub>3<\/sub> Particles with Specific Size and Morphology"]},{"DOI":"10.4028\/0-87849-440-5.335","title":["A Study on the Micro Property Testing of Micro Embossing Patterned Metallic Thin Foil"]},{"DOI":"10.4028\/0-87849-977-6.89","title":["Pitch Calibration by an Active Temperature Controlled Traceable Atomic Force Microscope and a Laser Diffractometer"]},{"DOI":"10.4028\/0-87849-453-7.49","title":["Experimental Study on the Material Response of Laser Weldment under Dynamic Loading"]},{"DOI":"10.4028\/0-87849-422-7.251","title":["Caries Inhibitory Activity of the Nano-HA In Vitro"]},{"DOI":"10.4028\/0-87849-462-6.1135","title":["An Actuator Laser of Optical Disk Drive High-Frequency Electromagnetic Vibrations Characteristic Analysis"]},{"DOI":"10.4028\/0-87849-421-9.1096","title":["A Manufacturing Supply Chain Business Model and Its Implementation in a Plastics Manufacturing Company"]},{"DOI":"10.4028\/0-87849-957-1.237","title":["Investigation of Thermomechanical Treated Austenitic Stainless Steel"]},{"DOI":"10.4028\/0-87849-960-1.2059","title":["Processing of Single-Stage Bellows of TiNi Shape Memory Alloy Using Rubber Bulge Method"]},{"DOI":"10.4028\/3-908451-06-x.283","title":["Dissolution Characteristics of Ceria in Ascorbic Acid Solutions with Implications to Cleaning"]},{"DOI":"10.4028\/0-87849-428-6.1067","title":["Local Approach to Thermally-Sprayed Coating\/Substrate Adhesion through LASAT (Laser Shock Adhesion Test)"]},{"DOI":"10.4028\/0-87849-462-6.2353","title":["Hydrogen Diffusivity and Permeability In Pd<sub>50-x<\/sub>Ti<sub>50<\/sub>(Cr, Fe)<sub>x<\/sub> Alloys"]},{"DOI":"10.4028\/0-87849-473-1.1429","title":["Effect of ZrO<sub>2<\/sub> on Mechanical and Biological Properties of Calcium Phosphate-Based Glass-Ceramics for Biomedical Applications"]},{"DOI":"10.4028\/0-87849-415-4.1101","title":["The Improved Johnson-Cook\u2019s Strength Model Taking Account of the Rate-Dependent Micro-Damage Evolution for C30 Concrete"]},{"DOI":"10.3969\/j.issn.1004-4132.2011.03.019","title":["Stability analysis and design of time-delay uncertain systems using robust reliability method"]},{"DOI":"10.4028\/0-87849-959-8.735","title":["Synthesis of Poly (Acrylic Acid-Co-Itaconic Acid) and its Dispersing Effect for Barium Titanate Aqueous Suspension"]},{"DOI":"10.4028\/3-908158-06-0.91","title":["Impregnation of 3D Woven Carbon Fibre Preforms by Electrophoretic Deposition of Single and Mix of Non Oxide Ceramic Nanoscale Powders, and Densification of the Composite Material"]},{"DOI":"10.4028\/0-87849-410-3.2411","title":["The Compressive Strength of Ceramic Microbeads"]},{"DOI":"10.4028\/0-87849-462-6.1027","title":["Welding of Fine Metal Particles by Using a Tungsten Needle and Measurement of the Strength of the Joints"]},{"DOI":"10.4028\/3-908158-15-x.72","title":["Effective Impregnation of SiO<sub>2<\/sub> Sol-Gel Solution in Pine Wood and Following Gel Localization in Free Cell Volume"]},{"DOI":"10.4028\/0-87849-454-5.281","title":["Hydrothermal Synthesis of TiO<sub>2<\/sub>\/SiO<sub>2<\/sub> Hybrid Photocatalyst from Rice Husk Ash"]},{"DOI":"10.4028\/0-87849-463-4.137","title":["Heat Resistance of Mg-Nd Based Casting Alloys Containing Gadolinium and Yttrium"]},{"DOI":"10.4028\/0-87849-959-8.643","title":["Combustion Synthesis of Nanosized Y<sub>2<\/sub>Hf<sub>2<\/sub>O<sub>7<\/sub> and Lu<sub>2<\/sub>Hf<sub>2<\/sub>O<sub>7<\/sub> Powders"]},{"DOI":"10.4028\/0-87849-473-1.656","title":["An Aqueous Photocrosslinkable Chitosan-PVA (Polyvinyl Alcohol) Binder for Tapecasting Alumina Substrates"]},{"DOI":"10.4028\/0-87849-473-1.983","title":["Fabrication of High-Content Ti<sub>3<\/sub>AlC<sub>2<\/sub> Powders by Mechanical Alloying"]},{"DOI":"10.4028\/0-87849-412-x.1461","title":["Measurement of Alloying Degree of Galvannealed Steels by X-Ray Diffraction"]},{"DOI":"10.4028\/0-87849-422-7.893","title":["Study of Protein Adsorption and Conformational Change on DLC and Ti Surfaces Using FTIR and Coomassie Brilliant Blue Protein Assay"]},{"DOI":"10.4028\/0-87849-434-0.527","title":["The Effects of Hot Band Annealing Temperature on the Texture of 2%Si Nonoriented Electrical Steel"]},{"DOI":"10.4028\/3-908451-51-5.162","title":["Influence of Burner Geometry on Flame Characteristics of Propane-Air Mixture: Experimental and Numerical Studies"]},{"DOI":"10.4028\/0-87849-434-0.565","title":["A Model for Multi Peak Dynamic Recrystallization in Copper"]},{"DOI":"10.4028\/0-87849-960-1.573","title":["Surface Roughness and Deformation of Grain during Tensile Plastic Deformation of Polycrystalline Titanium"]},{"DOI":"10.4028\/3-908158-01-x.83","title":["Modelling of the Generation of Residual Stresses of Thermal Origin in Ceramic Materials"]},{"DOI":"10.4028\/3-908451-02-7.227","title":["Multi-Layer Composite Based on Amorphous Materials and Quasicrystals, Deposited by Laser Ablation"]},{"DOI":"10.4028\/0-87849-463-4.19","title":["Metal Injection Molding Method of Ni-Free Austenitic Stainless Steel II - Microstructure and Mechanical Properties"]},{"DOI":"10.4028\/0-87849-442-1.199","title":["Mechanism of Orientation Selection for the Growth Of (111) Twin Boundary Free 3C-SiC Single Crystals on Hexagonal Basis"]},{"DOI":"10.4028\/3-908451-06-x.23","title":["Interface State Densities and Surface Charge on Wet-Chemically Prepared Si(100) Surfaces"]},{"DOI":"10.4028\/3-908158-14-1.1","title":["Self-Oscillating Gel as Smart Materials"]},{"DOI":"10.4028\/0-87849-432-4.267","title":["Annealing Behavior of the Compressed AZ31 Magnesium Alloy with Different Strain"]},{"DOI":"10.4028\/0-87849-999-7.602","title":["Research on Software Error Compensation of Ultra-Precision Lathe"]},{"DOI":"10.4028\/3-908158-03-6.228","title":["Status and Prospects of HTS Synchronous Machines"]},{"DOI":"10.4028\/0-87849-958-x.939","title":["Shear Flow Analysis of Nanosize Particle Flow Behavior Using Kinetic Theory"]},{"DOI":"10.4028\/3-908451-15-9.239","title":["Estimation of the Number of Physical Flaws from Periodic ISI Data of SG Tubes Using Effective POD"]},{"DOI":"10.4028\/0-87849-432-4.491","title":["Intermediate Phase Growth of Mg-Al Diffusion Couple under a Strong Static Magnetic Field"]},{"DOI":"10.4028\/0-87849-965-2.483","title":["Bending Strength of the Seeded and Tape Cast Si<sub>3<\/sub>N<sub>4<\/sub> before and after Oxidation Exposure in Air at 1500\u00b0C"]},{"DOI":"10.4028\/3-908158-05-2.227","title":["Patient Specific Finite Element Modeling of a Human Skull"]},{"DOI":"10.4028\/3-908158-01-x.1729","title":["Light Weight Ceramic Armor - Influence of Processing on Ballistic Performance"]},{"DOI":"10.4028\/0-87849-425-1.823","title":["Laser Direct Write Doping and Metallization Fabrication of Silicon Carbide PIN Diodes"]},{"DOI":"10.4028\/0-87849-422-7.827","title":["Bone-Bonding Strength of a New Composite Bone Cement"]},{"DOI":"10.4028\/3-908451-30-2.1065","title":["Electrodynamics of Left-Handed Medium"]},{"DOI":"10.4028\/0-87849-995-4.114","title":["Mechanical Properties of Nanocrystalline HVOF Coatings"]},{"DOI":"10.4028\/0-87849-959-8.1409","title":["Influence of Powder Characteristics on Sintering of AlN Ceramics"]},{"DOI":"10.4028\/0-87849-978-4.875","title":["Fabrication of Bi-Te Based Thermoelectric Semiconductors by Using Hybrid Powders"]},{"DOI":"10.4028\/3-908451-41-8","title":["Diffusion and Stresses"]},{"DOI":"10.4028\/0-87849-425-1.983","title":["Effect of Reactive-Ion Etching on Thermal Oxide Properties on 4H-SiC"]},{"DOI":"10.4028\/0-87849-413-8.927","title":["A Numerical Study of MSD in Aircraft Lap Joints"]},{"DOI":"10.4028\/0-87849-428-6.3335","title":["Stored Energy and Recrystallization Process"]},{"DOI":"10.4028\/3-908451-59-0.427","title":["Microstructural Evolution of AZ91 Alloy Containing 3%Ca Prepared by Cooling Slope"]},{"DOI":"10.4028\/0-87849-462-6.1801","title":["Numerical Simulation on the Liquid Metal Flow of the Acceleration Phase in the Shot Sleeve of Cold Chamber Die Casting Process"]},{"DOI":"10.4028\/0-87849-462-6.1521","title":["Surface Modification of Titanium with Hydrothermal Treatment"]},{"DOI":"10.4028\/0-87849-458-8.961","title":["Frequency Spectrum Features of Material Removal Function in Optical Manufacturing"]},{"DOI":"10.1109\/icee.2008.4585183","title":["Hardware Dedicated Integer-Pel Motion Estimator for High Definition H.264\/AVC Video Encoder"]},{"DOI":"10.4028\/0-87849-422-7.733","title":["Comparisons of the Apatite Presentation and Demineralization in Enamel and Cementum by Atomic Force Microscopy"]},{"DOI":"10.4028\/0-87849-986-5.251","title":["Study on Single-Plane Biaxial Balance Monitor System in ULTRA-Precision Grinding"]},{"DOI":"10.4028\/3-908158-05-2.197","title":["Immobilization of Chitosan on the Plasma-Activated Poly-L-Lactic Acid Film Surface Using Evaporated Acrylic Acid as the Intermediate"]},{"DOI":"10.4028\/0-87849-415-4.1023","title":["Accelerated Fatigue Tests of BS 080A42 Steel Using the WBE Mission Loadings"]},{"DOI":"10.4028\/0-87849-457-x.943","title":["Enhancement of the Mechanical Property of Apatite-Fiber Scaffold Using Type I-Collagen"]},{"DOI":"10.4028\/0-87849-458-8.992","title":["Investigation on Steady-State Wire Drawing for Strain-Rate Sensitivity Materials"]},{"DOI":"10.4028\/3-908451-38-8.123","title":["Luminescence of Doped Nanoparticles of Wide Band Gap II-VI Compounds"]},{"DOI":"10.4028\/0-87849-972-5.321","title":["Closed-Loop-Control of the Material Flow in the Deep Drawing Process"]},{"DOI":"10.5555\/test_2013-02-19-test3-conflict","title":["Test deposit conflict"]},{"DOI":"10.4028\/0-87849-419-7.205","title":["Mg-Y-Cu Bulk Metallic Glass Obtained by Mechanical Alloying and Powder Consolidation"]},{"DOI":"10.4028\/0-87849-960-1.285","title":["Modeling and Numerical Calculation of Heat Transfer during Magnetic Field Quenching"]},{"DOI":"10.4028\/0-87849-423-5.203","title":["Mechanical Activation of Nb75Al Mixtures Using Shaker and Planetary Ball Mills"]},{"DOI":"10.4028\/0-87849-433-2.611","title":["Computer Aided Simulation of the Rheology Forging Process for Aluminum Alloys and its Experimental Investigation"]},{"DOI":"10.4028\/3-908158-01-x.1489","title":["Measurement and Simulation of the Oxidation of Carbon Fibers and C\/SiC Ceramic"]},{"DOI":"10.4028\/0-87849-419-7.1273","title":["Microstructures of W-Mo-Ni-Fe Heavy Alloys"]},{"DOI":"10.4028\/3-908158-12-5.160","title":["Characterization of Brightness of ZnS Electroluminescent Device with Dielectric Materials of SOG or TEOS"]},{"DOI":"10.1037\/e522092014-001","title":["Books related to media psychology"]},{"DOI":"10.4028\/0-87849-964-4.367","title":["Investigation of Dynamic Strain Ageing Effects of Low Alloy Steels 15Kh2MFA and 15Kh2NMFA"]},{"DOI":"10.4028\/0-87849-440-5.1303","title":["A Gear Chain Fault Detection Method Using an Adaptive Interference Canceling"]},{"DOI":"10.4028\/0-87849-978-4.16","title":["Fatigue Life Prediction of the Vulcanized Natural Rubber"]},{"DOI":"10.5555\/canary-17","title":["Canary: eafcde35-bf87-432d-9b5e-a10bda88449a"]},{"DOI":"10.5555\/test1204abc","title":["test title error one"]},{"DOI":"10.4028\/3-908451-31-0.1413","title":["Change of Mechanical Properties of FM Steels after Thermal Aging"]},{"DOI":"10.4028\/0-87849-454-5.95","title":["Preparation of Mesoporous Silicon Carbide"]},{"DOI":"10.4028\/3-908158-15-x.165","title":["Multi-UUVs Team Line Formation Control by a Behaviour-Based Method with Fuzzy Logic Adapters"]},{"DOI":"10.4028\/0-87849-422-7.147","title":["Influence of Hydrothermal Reaction Temperature and pH on Phase Stability of Hydroxyapatite"]},{"DOI":"10.4028\/0-87849-969-5.183","title":["Effects of Temperature Fluctuations on X-Ray Stress Determination"]},{"DOI":"10.4028\/3-908158-04-4.55","title":["Influence of Temperature on Nano-Graphene Structuring of PLD Grown Carbon Films - An X-Ray Diffraction Study"]},{"DOI":"10.4028\/0-87849-470-7.838","title":["Research on Product Development Process Management for Virtual Enterprise"]},{"DOI":"10.4028\/0-87849-976-8.467","title":["Time-Frequency Feature Extraction without Cross-Terms Based on Acoustic Signal in Rotor Malfunctions"]},{"DOI":"10.4028\/0-87849-989-x.715","title":["Critical Load between Sea Ice and Sea Structure"]},{"DOI":"10.4028\/0-87849-413-8.1173","title":["Transformation Cyclic Damage of Near-Equiatomic Ni-Ti"]},{"DOI":"10.4028\/0-87849-456-1.2119","title":["Fabrication and Fracture Properties of Nano-Sized HAP-TZP (3Y) Bioceramic for Artificial Joints"]},{"DOI":"10.2523\/99715-ms","title":["Modeling of Multilateral and Maximum Reservoir-Contact Wells in Heterogeneous \nPorous Media"]},{"DOI":"10.4028\/0-87849-443-x.771","title":["Influence of Localized Primary Recrystallization Texture on Secondary Recrystallized Grains in Fe-3%Si"]},{"DOI":"10.4028\/0-87849-992-x.109","title":["Adhesion, Proliferation and Morphology of Osteoblasts Cultured on Apatite Ceramics with Preferred Orientation to a-Plane"]},{"DOI":"10.4028\/0-87849-971-7.345","title":["Reduction of NiO-WO<sub>3<\/sub> Oxide Mixtures Synthesized by Gel-Combustion Technique: A Route to Ni-W Alloys"]},{"DOI":"10.4028\/0-87849-980-6.75","title":["Interatomic Potentials for Metal\/Metal Wetting Systems"]},{"DOI":"10.3969\/j.issn.1004-4132.2010.01.022","title":["Hooke and Jeeves algorithm for linear support vector machine"]},{"DOI":"10.4028\/0-87849-428-6.4698","title":["Ultrafine Grained Steels due to Super Short Interval Multi-Pass Rolling in Stable Austenite Region"]},{"DOI":"10.1109\/9780470547212.ch2","title":["The TransmissionLine Equations for TwoConductor Lines"]},{"DOI":"10.4028\/0-87849-458-8.221","title":["A Fuzzy Algorithm for Auto-Focusing Laser Diode Products"]},{"DOI":"10.5555\/test12312365a"},{"DOI":"10.4028\/0-87849-433-2.101","title":["Evaluation of Strain Concentration in Carbon Nanotube with Bend Junction"]},{"DOI":"10.4028\/3-908451-21-3.109","title":["Mechatronic System of the Injection of Ethanol in an Intake Manifold of a Diesel Engine"]},{"DOI":"10.4028\/0-87849-462-6.1059","title":["Microstructure and Mechanical Properties at the Unsteady Areas of Non-Linear Friction Stir Welding"]},{"DOI":"10.5555\/gwb65unxfr","title":["Check this out again."]},{"DOI":"10.4028\/0-87849-992-x.1105","title":["A Novel Preparation Method for Nano-HA\/PLA Composite with Grafted PLA"]},{"DOI":"10.4028\/0-87849-443-x.529","title":["Effect of Initial Lamellar Structure on Globularization of Hot Multi-Forged ELI Grade Ti-6Al-4V Alloy"]},{"DOI":"10.4028\/3-908451-43-4.405","title":["Effect of Grown-In Defects on the Structure of Oxygen Precipitates in Cz-Si Crystals with Different Diameter"]},{"DOI":"10.4028\/0-87849-410-3.486","title":["Preparation of SDC Interlayer and Influence on Performances of Anode Supported Solid Oxide Fuel Cells"]},{"DOI":"10.4028\/0-87849-435-9.645","title":["Cavity of Al-Cu-Mg Alloy during Superplastic Deformation"]},{"DOI":"10.4028\/0-87849-982-2.79","title":["Interfacial Structure of GaN and InN Thin Films Grown on ZnO Substrates"]},{"DOI":"10.4028\/0-87849-428-6.5031","title":["Effect of Crystalline Phase on Dynamic Deformation Properties of Zr-Based BMG Alloys"]},{"DOI":"10.4028\/0-87849-987-3.217","title":["Transition Saddle-Cylinder Shape of Thin Unsymmetric [0\/90] Square Plates under Hygrothermal Loads: Fringe Projection Method and Variational Approach"]},{"DOI":"10.4028\/0-87849-466-9.117","title":["Enhancing Fatigue Properties of Nanostructured Metals and Alloys"]},{"DOI":"10.4028\/0-87849-985-7.133","title":["Subgrain Size-Distributions, Dislocation Structures, Stacking- and Twin Faults and Vacancy Concentrations in SPD Materials Determined by X-Ray Line Profile Analysis"]},{"DOI":"10.4028\/0-87849-990-3.589","title":["Dynamic Analysis of Rigid-Body Mechanisms Mounted on Flexible Support Structures \u2014 Planar Case"]},{"DOI":"10.4028\/0-87849-440-5.1089","title":["Powdering in Coating Layer of Galvannealed Nb-Ti Free Extra Low Carbon Steel Sheet"]},{"DOI":"10.4028\/0-87849-419-7.1389","title":["Fabrication of Nanostructured Fe-Co Alloy Powders by Hydrogen Reduction and Its Magnetic Properties"]},{"DOI":"10.4028\/0-87849-410-3.2235","title":["Fabrication and Characterization of the Multilayer Film Containing Polyoxometalate with Pendant Support-Ligand"]},{"DOI":"10.4028\/0-87849-456-1.2962","title":["Crack Propagation Behavior at Sn37Pb-Copper Interface in Low Cycle Fatigue"]},{"DOI":"10.4028\/0-87849-444-8.461","title":["An Updated Comparison of the Force Reconstruction Methods"]},{"DOI":"10.4028\/0-87849-992-x.693","title":["Topography Control of Hydroxyapatite Coatings"]},{"DOI":"10.4028\/0-87849-986-5.555","title":["Material Removal Model and Experimental Verification for Abrasive Jet Precision Finishing with Wheel as Restraint"]},{"DOI":"10.4028\/0-87849-456-1.78","title":["Failure Analysis of Outer Swirls in the Fuel Nozzle"]},{"DOI":"10.4028\/0-87849-412-x.1257","title":["Design of a Time-Frequency Distribution for Vibration Monitoring under Corrosions in the Pipe"]},{"DOI":"10.4028\/0-87849-457-x.377","title":["Vertebroplasty in Goat Model Using Macroporous Calcium Phosphate Cement (MCPC<sup>\u00ae<\/sup>)"]},{"DOI":"10.4028\/3-908451-31-0.1809","title":["Chiral (Salen) Complexes Encapsulated in Mesoporous ZSM-5 as an Optical Active Catalyst for Asymmetric Phenolic Ring Opening of Terminal Epoxides"]},{"DOI":"10.4028\/3-908451-06-x.163","title":["Electrophoretic Studies on Silicon Nitride: Traces of Silicates in UPW Shift Zeta Potential Similar to SC-1"]},{"DOI":"10.4028\/3-908158-11-7.211","title":["Thermoelectric Properties of High Density Sintered Ca<sub>3<\/sub>Co<sub>2<\/sub>O<sub>6<\/sub>"]},{"DOI":"10.4028\/0-87849-437-5","title":["Sheet Metal 2007"]},{"DOI":"10.4028\/0-87849-414-6.253","title":["Residual Stress Distribution in Pure Bending Beam Subjected to Tensile Failure on One Side"]},{"DOI":"10.4028\/0-87849-475-8.61","title":["Deposition and Properties Studies of Superfine TiN Films with Magnetic Filter"]},{"DOI":"10.4028\/3-908158-01-x.218","title":["Synthesis of ZrW<sub>2<\/sub>O<sub>8<\/sub> Ceramics and Composites from Aqueous Sol-Gel Precursors"]},{"DOI":"10.4028\/0-87849-409-x.285","title":["Interdiffusion between Ni Based Superalloy and Diffusion Barrier Coatings at 1423K"]},{"DOI":"10.1109\/icee.2008.4585281","title":["A Statistical Modeling based System for Blink Detection in Digital Cameras"]},{"DOI":"10.4028\/0-87849-457-x.1181","title":["In Vitro Studies of Cell Growth on Three Differently Fabricated Hydroxyapatite Ceramic Scaffolds for Bone Tissue Engineering"]},{"DOI":"10.4028\/3-908451-47-7.37","title":["Structural Study of an Amorphous Cr65Nb35 Alloy Produced by Mechanical Alloying Using Reverse Monte Carlo Simulations"]},{"DOI":"10.4028\/0-87849-419-7.1089","title":["The Effect of Oxygen Addition on Oxidation Resistance and Cutting Performance of Si<sub>3<\/sub>N<sub>4<\/sub> Ceramics"]},{"DOI":"10.4028\/0-87849-436-7.565","title":["A Study on the Effect of Grain Size on the Bioactivity of Nano-Titania Ceramics"]},{"DOI":"10.4028\/0-87849-968-7.661","title":["Application of Polymer Plating to Inhibit Corrosion of Magnesium Alloy"]},{"DOI":"10.4028\/0-87849-985-7.937","title":["An EBSD Study of Texture and Grain Boundary Evolution in a Strongly Textured Aluminium Alloy during ECA Pressing"]},{"DOI":"10.4028\/0-87849-422-7.341","title":["A Novel Approach to Prepare Nano-Hydroxyapatite \/ Silk Fibroin Composite to Increase Nucleation Sites"]},{"DOI":"10.4028\/3-908158-01-x.2412","title":["Relaxor Single Crystals with Giant k<sub>31<\/sub> Mode"]},{"DOI":"10.4028\/3-908158-01-x.1218","title":["Coating of Austentic Stainless Steel with Ti\/O Compositionally Gradient Film by Reactive DC Sputtering"]},{"DOI":"10.4028\/0-87849-995-4.162","title":["A Slow Strain Rate Test Experiment to Evaluate the Characteristics of High-Strength Al-Mg Alloy for Application in Ships"]},{"DOI":"10.4028\/0-87849-429-4.726","title":["Effects of Cooling Rate and Direct Hot Deformation Conditions after Solidification on the Austenitic Microstructure Evolved by Simulated Strip Casting and Thin Slab Casting Processes in HSLA Steels"]},{"DOI":"10.4028\/0-87849-422-7.749","title":["Biocompatibility of Cerium Oxide Films Synthesized by Dual Plasma Deposition"]},{"DOI":"10.4028\/0-87849-432-4.379","title":["Effect of Rolling and Annealing on the Mechanical Properties and Microstructure of AZ31 Magnesium Alloy"]},{"DOI":"10.4028\/0-87849-422-7.807","title":["Preliminary Study on the Biocompatibility of Calcium Phosphate Bone Cement Containing N,O-Carboxymethyl Chitosan"]},{"DOI":"10.4028\/0-87849-416-2","title":["Advances in Abrasive Technology IX"]},{"DOI":"10.4028\/0-87849-987-3.337","title":["Measurement on Rotating Mechanical Component by Thermoelasticity"]},{"DOI":"10.1109\/dac.2007.375307","title":["An Efficient Mechanism for Performance Optimization of Variable-Latency Designs"]},{"DOI":"10.4028\/0-87849-443-x.1237","title":["Effect of the Intercalation of the Carbon Layer on the Kinetics of Grain Growth of FePt Magnetic Thin Film during Ordering Reaction - A Monte Carlo Simulation Study"]},{"DOI":"10.5555\/isbn-a","title":["Title test 1"]},{"DOI":"10.5555\/jotd\/test","title":["Test  Article"]},{"DOI":"10.4028\/0-87849-459-6.219","title":["Monitoring and Compensation of Thermal Error of Profile Grinding Spindle"]},{"DOI":"10.4028\/0-87849-442-1.501","title":["Conductive Atomic Force Microscopy Studies on the Reliability of Thermally Oxidized SiO<sub>2<\/sub>\/4H-SiC"]},{"DOI":"10.4028\/0-87849-966-0.436","title":["Synthesis and Characterization of Nanosized Zn<sub>x<\/sub>Mn<sub>1-x<\/sub>Fe<sub>2<\/sub>O<sub>4<\/sub> Powders by Glycothermal Process"]},{"DOI":"10.4028\/0-87849-412-x.952","title":["The Stress Concentration Factor (K<sub>t<\/sub>) and Fatigue Crack Behavior on the Relative Defect Location in Monolithic Aluminum versus GLARE"]},{"DOI":"10.4028\/0-87849-423-5.414","title":["Development of ZrO<sub>2<\/sub>-TiO<sub>2<\/sub> Porous Ceramic as Soil Humidity Sensor for Application in Environmental Monitoring"]},{"DOI":"10.4028\/0-87849-990-3.757","title":["Identification of Plasticity Parameters of Metallic Coatings by Means of Depth-Sensing Micro-Indentation"]},{"DOI":"10.4028\/0-87849-428-6.889","title":["Estimation of Critical Composition for the Transition from Brittle to Ductile in W-Cu Composites"]},{"DOI":"10.4028\/0-87849-472-3.129","title":["Experimental Analysis in Lithium Niobate CMP for Room Temperature Bonding"]},{"DOI":"10.4028\/0-87849-990-3.607","title":["Studies on CCD On-Line Detection in Curve Grinding"]},{"DOI":"10.4028\/0-87849-437-5.349","title":["Optimisation of the Stamping Parameters of a Drawn-Part Made of Stainless Steel"]},{"DOI":"10.4028\/0-87849-990-3.271","title":["Fabrication of Rolling Mold for a 200\u03bcm Microlens Array by 3D LIGA-Like Processes"]},{"DOI":"10.4028\/0-87849-959-8.1489","title":["Study on the Wear Resistance of Micro-Nanostructured WC Composite Coating Sintered by Induced Heating"]},{"DOI":"10.4028\/0-87849-961-x.15","title":["A Rapid Setting TTCP-DCPD Cement. Study of the Setting Reaction as a Function of Time"]},{"DOI":"10.4028\/0-87849-985-7.119","title":["Superplastic Deformation of Ultrafine Grained Al Alloy Processed by ECAP and Post-Rolling"]},{"DOI":"10.5555\/as2323","title":["Is this thing on?"]},{"DOI":"10.4028\/0-87849-428-6.1813","title":["Microstructure Evolution of AZ31 Magnesium Alloy during Warm Compression Forming"]},{"DOI":"10.4028\/0-87849-429-4.587","title":["Thermoelectric Properties of Ni-Doped CoSb<sub>3<\/sub> Prepared by Encapsulated Induction Melting"]},{"DOI":"10.4028\/0-87849-965-2.33","title":["Biomimetic Application of Hierarchically Ordered Nanoporous Silica Ceramics"]},{"DOI":"10.1109\/icee.2008.4585214","title":["A Novel Wind Noise Reduction for Digital Video Camera"]},{"DOI":"10.1109\/eumc.1997.633706","title":["Electrical And Mechanical Design Of The AMOS Communication Antenna Subsystem"]},{"DOI":"10.4028\/3-908451-30-2.1347","title":["Network Position, Research Funding and Interdisciplinary Collaboration among Nanotechnology Scientists: An Application of Social Network Analysis"]},{"DOI":"10.4028\/0-87849-966-0.129","title":["Surface Morphology Characteristics and Improvements on Corrosion Resistance in Anodized Mg-Al Alloys as a Result of Sealing Treatments"]},{"DOI":"10.4028\/3-908451-31-0.899","title":["Synthesis of Monodisperse FePt Nanoparticles at a Low Temperature"]},{"DOI":"10.4028\/0-87849-986-5.320","title":["Magnetic Field-Assisted Polishing for Ferromagnetic Metallic Material"]},{"DOI":"10.4028\/0-87849-960-1.1177","title":["Preparation and Characterization of Antibacterial Titanate Whiskers"]},{"DOI":"10.4028\/0-87849-961-x.679","title":["In Vitro Mesenchymal Stem Cell Culture Using Calcium Phosphate Glass Scaffold"]},{"DOI":"10.4028\/0-87849-959-8.195","title":["A Novel Micro-Actuator Made from PZT"]},{"DOI":"10.4028\/0-87849-422-7.927","title":["Biocompatibility Improvement of Pure Hydroxyapatite (HA) with Different Porosity"]},{"DOI":"10.4028\/0-87849-456-1.110","title":["Dynamic Fracture Behavior of Magnesium Alloy"]},{"DOI":"10.4028\/0-87849-959-8.981","title":["Preparation of Zirconia Nanopowders in Ultrasonic Field by the Sol-Gel Method"]},{"DOI":"10.4028\/0-87849-430-8.252","title":["Research on Flow in Microchannels with Lotus Effect Coating by Molecular Dynamics Simulation"]},{"DOI":"10.4028\/0-87849-415-4.747","title":["A Study on the Stent Expansion Behavior of the Human Artery Based on Finite Element Analysis"]},{"DOI":"10.4028\/0-87849-960-1.1715","title":["Magnetic Properties and Magnetostriction of Zn<sub>x<\/sub>Ni<sub>1-x <\/sub>MnSb Alloys"]},{"DOI":"10.4028\/0-87849-423-5.720","title":["Contribution to a Technological Characterization of Kaolins from Cuba and Brazil"]},{"DOI":"10.4028\/0-87849-462-6.2021","title":["Direct Observation of Nanostructural Fluctuation during Radiation-Induced Amorphization"]},{"DOI":"10.4028\/0-87849-960-1.49","title":["Characteristics of Deformation-Enhanced Transformation in Plain Low Carbon Steel"]},{"DOI":"10.4028\/3-908454-01-8.46","title":["Enhancement of Reliability of Machines and Materials by Friction Plating"]},{"DOI":"10.4028\/0-87849-967-9.207","title":["In Vitro Behaviors of Copolymer of Poly (1,4-Phenylene Sulfide-2, 4-Phenylene Sulfide Acid) and Its Nano Hydroxyapatite Composites"]},{"DOI":"10.4028\/0-87849-413-8.81","title":["Micromechanical Analysis of Excavation Damaged Zone in Anisotropic Rock Mass"]},{"DOI":"10.4028\/0-87849-429-4.858","title":["Change in Stress Axis with Creep Deformation in PST Crystal"]},{"DOI":"10.4028\/0-87849-960-1.3291","title":["Molecular Dynamics Simulation of Compressive Mechanical Behavior of Nanocrystalline Fe"]},{"DOI":"10.5555\/fbpxmupvtc","title":["test"]},{"DOI":"10.4028\/0-87849-461-8.261","title":["Precision Grinding of SUS304 Using Metal Bonded CBN Wheel"]},{"DOI":"10.4028\/0-87849-448-0.137","title":["Crack Growth Process of Ni-Single Crystal with Cathodic Hydrogen Charging"]},{"DOI":"10.4028\/0-87849-428-6.1759","title":["Effects of Differential Speed Rolling on Microstructure and Mechanical Properties of AZ31 Magnesium Alloy"]},{"DOI":"10.4028\/3-908451-25-6.375","title":["Tempering Kinetics of S45C Martensitic Steel"]},{"DOI":"10.5555\/test0330","title":["CrossRef Listing of Deleted DOIs"]},{"DOI":"10.4028\/0-87849-433-2.113","title":["Mechanical Properties of Bulk Glassy Metal after Deformation under High Temperature Conditions"]},{"DOI":"10.4028\/0-87849-440-5.299","title":["Fatigue Life Prediction of High-Strength Bolt Subjecting to Torque"]},{"DOI":"10.4028\/0-87849-958-x.470","title":["Effectiveness of Yttria Filters for the Removal of Volatile Ruthenium at High Temperatures"]},{"DOI":"10.4028\/0-87849-984-9.494","title":["Densification Study of SiC:Al<sub>2<\/sub>O<sub>3<\/sub>:Y<sub>2<\/sub>O<sub>3<\/sub> with Polymer Additions"]},{"DOI":"10.4028\/0-87849-430-8.473","title":["Fabrication of 3-Dimensional Microstructures Using Dynamic Image Projection"]},{"DOI":"10.4028\/3-908158-13-3.22","title":["Piezoelectricity Experimentation, Modeling and Simulation: Common Practices and Realistic Considerations"]},{"DOI":"10.4028\/0-87849-422-7.7","title":["Mechano-Chemical Synthesis of Biphasic Calcium Phosphates with the Various Ratio of HA and \u03b2-TCP"]},{"DOI":"10.4028\/0-87849-422-7.537","title":["The Behavior of SiC Films Fabricated by Hybrid Laser-Magnetron Deposition after Immersion"]},{"DOI":"10.4028\/0-87849-456-1.1211","title":["Estimation of the Elastic-Plastic Fracture Behavior of Fiber Reinforced MMC According to the Change of Interfacial Characteristics"]},{"DOI":"10.4028\/0-87849-473-1.1050","title":["Preparation and Properties of 2D Carbon Cloth Reinforced Ultra-High Temperature Ceramic Matrix Composites"]},{"DOI":"10.4028\/3-908158-13-3.508","title":["A Numerical Method for the Dynamic Analysis of Buildings Provided with Viscoelastic Devices"]},{"DOI":"10.4028\/0-87849-456-1.3124","title":["Accurate Determination of Stress Intensity Factor for Interface Crack by Finite Element Method"]},{"DOI":"10.4028\/3-908451-46-9.37","title":["Germanium Surface Passivation Using Ozone Gaseous Phase"]},{"DOI":"10.4028\/3-908451-25-6.479","title":["Microstructure and Mechanical Properties of the Wide-Gap Region Brazed with Various Powder Mixing Ratios of Additive to Filler Metal Powders"]},{"DOI":"10.4028\/0-87849-415-4.211","title":["Static and Dynamic Deformation Measurements of Micro Beams by the Technique of Digital Image Correlation"]},{"DOI":"10.4028\/0-87849-425-1.597","title":["Dependence of the Ionization Energy of Phosphorous Donor in 4H-SiC on Doping Concentration"]},{"DOI":"10.4028\/0-87849-980-6.263","title":["Nano-Scale Stress Microscopy of Ceramic Materials Using Their Cathodoluminescence Emission"]},{"DOI":"10.4028\/3-908451-36-1.26","title":["Carburizing of Low Carbon Steel with Plasma Electrolysis in Aqueous Solution"]},{"DOI":"10.4028\/0-87849-992-x.239","title":["Solubility of Magnesium-Containing \u03b2-Tricalcium Phosphate: Comparison with that of Zinc-Containing \u03b2-Tricalcium Phosphate"]},{"DOI":"10.4028\/3-908451-31-0.1397","title":["Influence of ECAP Routes on the Microstructure and Mechanical Properties of Hot Extruded 3003 Al Alloy"]},{"DOI":"10.4028\/0-87849-456-1.973","title":["Fracture-Damage Model for Anchored Discontinuous Jointed Rockmass and its Application"]},{"DOI":"10.4028\/0-87849-957-1.399","title":["Laser Transformation Hardening of Different Steels and 3D Modelling of Their Temperature Distribution"]},{"DOI":"10.4028\/3-908451-31-0.1793","title":["Photocatalytic Hydroxylation of Phenol over Ti-Containing Zeolites (TS-1, Ti-MCM-41)"]},{"DOI":"10.4028\/3-908451-59-0.641","title":["Use of Calphad Thermodynamics to Simulate Phase Formation during Semi-Solid Processing"]},{"DOI":"10.4028\/0-87849-978-4.653","title":["Application of Electric Resistance Change Method to Damage Detection of CFRP Bolted Joints"]},{"DOI":"10.4028\/0-87849-469-3.245","title":["Effect of Nickel Purity on Self-Diffusion along High-Diffusivity Paths"]},{"DOI":"10.4028\/0-87849-428-6.809","title":["Combustion Synthesis of TiB<sub>2<\/sub> Particle Dispersed Metal Matrix Composites"]},{"DOI":"10.4028\/0-87849-410-3.2228","title":["Structure and Optical Properties of Si Films Deposited by Inductively Coupled Plasma CVD at Room Temperature"]},{"DOI":"10.4028\/0-87849-473-1.1377","title":["Preparation of Cu Coated ZrW<sub>2<\/sub>O<sub>8<\/sub> Composite Powders via Heterogeneous Precipitation Process"]},{"DOI":"10.4028\/0-87849-990-3.295","title":["Study on Indentation-Sliding Contact Conditions between Semiconductor Terminal and Electrically Testing Probes"]},{"DOI":"10.4028\/0-87849-983-0.242","title":["Study on Fractal Characteristics and Performance of Ultrafine Slag Grains"]},{"DOI":"10.4028\/3-908451-02-7.181","title":["Nanomaterials Produced by Ablation and Pulsed Laser Deposition"]},{"DOI":"10.4028\/0-87849-995-4.734","title":["Nano Scale Material Property Measurement of MEMS Material Using Piezo Actuated Material Testing Machine"]},{"DOI":"10.4028\/0-87849-992-x.507","title":["Synthetic Calcium Phosphate Nanoparticles Mimetic of Bone Mineral: Similarities in Composition and Morphology"]},{"DOI":"10.4028\/0-87849-422-7.1129","title":["Mesenchymal Stem Cell Proliferation and Morphological Analysis on Interconnected Macroporous Structures"]},{"DOI":"10.4028\/3-908451-13-2.663","title":["Silicon Carbide: Defects and Devices"]},{"DOI":"10.4028\/0-87849-410-3.2111","title":["Preparation and Characterization of Nano-Sized Ni Powders inside a Nonionic Polymer Network"]},{"DOI":"10.4028\/0-87849-995-4.294","title":["Net-Shape Forming of TiAl Automotive Parts for Fuel Efficiency"]},{"DOI":"10.4028\/0-87849-960-1.3215","title":["Simulation Study of Thermal Buoyance Influence on Flow Characteristic in Single Outlet Tundish"]},{"DOI":"10.4028\/0-87849-452-9.139","title":["Monitoring of Hydrocarbon Gaseous Compounds formed During Bioleaching of Copper Sulphide Minerals with Mesophilic Microorganisms"]},{"DOI":"10.4028\/0-87849-428-6.1258","title":["Analysis on the Microstructure of Ceramic Coating Layer Fabricated by Plasma Electrolytic Oxidation"]},{"DOI":"10.4028\/0-87849-456-1.1974","title":["Effects of Resistance Welding on the Failure Strength Properties of Natural Fiber Reinforced Composite"]},{"DOI":"10.4028\/3-908451-18-3.39","title":["Synthesis and Characterization of Hybrid Aluminum Composites Reinforced with Ni Particulates and Interconnected Fe Mesh"]},{"DOI":"10.4028\/0-87849-423-5.158","title":["Zr-Rich Phases in Sm(CoFeCuZr)<sub>z<\/sub> Magnets"]},{"DOI":"10.4028\/0-87849-451-0.147","title":["Friction and Wear Properties of Aluminum Matrix Composites and its Application"]},{"DOI":"10.4028\/0-87849-960-1.1497","title":["Development of an Innovative Carbon-Based Ceramic Material Application in High Temperature, Neutron and Hydrogen Environment"]},{"DOI":"10.4028\/0-87849-967-9.413","title":["Cellular Biological Evaluation of Medical Polyacrylamide Hydrogel"]},{"DOI":"10.5555\/test0616","title":["journal of test deposit"]},{"DOI":"10.4028\/0-87849-978-4.2654","title":["Numerical Simulation of Crack Development in Reinforced Concrete Structures under Eccentric Loading"]},{"DOI":"10.4028\/0-87849-456-1.1536","title":["Glass-Forming Ability, Interface Joint Strength and Thermal Properties of Sealing Glasses for SOFC"]},{"DOI":"10.4028\/0-87849-419-7.1597","title":["Fabrication of Bi-2212\/SrSO<sub>4<\/sub> Composite Superconductors by Melting Powder Mixtures"]},{"DOI":"10.4028\/0-87849-959-8.349","title":["Effect of BaCO<sub>3<\/sub> and Pb<sub>3<\/sub>O<sub>4<\/sub> on Properties of BaTiO<sub>3<\/sub>-Based PTCR Ceramics"]},{"DOI":"10.4028\/0-87849-422-7.565","title":["Preparation of Titania Films on Implant Titanium by Electron Cyclotron Resonance Plasma Oxidation"]},{"DOI":"10.4028\/0-87849-433-2.1399","title":["Quasi-Static and Dynamic Axial Crushing of Various Polygonal Tubes"]},{"DOI":"10.1109\/ipemc.2006.297105","title":["Cascaded Multilevel Converters with Non-Integer or Dynamically Changing DC Voltage Ratios"]},{"DOI":"10.4028\/0-87849-433-2.865","title":["Plastic Flow Joining by Shot Peening"]},{"DOI":"10.4028\/0-87849-433-2.447","title":["Fracture Parameters on Three-Dimensional Sliding Mode Fracture"]},{"DOI":"10.1109\/isic.2007.4359577","title":["Design of Grid-Connected Photovoltaic Generation System with High Step-Up Converter and Sliding-Mode Inverter Control"]},{"DOI":"10.4028\/0-87849-428-6.1603","title":["Brazing of AZ31B Magnesium Alloy Sheet"]},{"DOI":"10.4028\/0-87849-411-1.243","title":["Oxygen Reduction Electrode Properties of Perovskite-Related Oxides Sr(Fe,Co,Ru)O<sub>3-\u03b4<\/sub> at Low Temperatures"]},{"DOI":"10.5555\/987sdfestre","title":["More Test"]},{"DOI":"10.4028\/0-87849-428-6.988","title":["A Study on the Chemical Resistance of GT Composites"]},{"DOI":"10.1109\/sam.2006.1677184","title":["CRB Analysis of the Impact of Unknown Receiver Noise on Phased Array Calibration"]},{"DOI":"10.4028\/0-87849-472-3.77","title":["Synthesis of Nickel Coated Gadolinia Doped Ceria Nanopowder by Microwave Radiation"]},{"DOI":"10.4028\/0-87849-966-0.153","title":["Surface Characteristics of Ni-Diamond Composite Powders by Electroless Plating Method"]},{"DOI":"10.4028\/0-87849-980-6.69","title":["Evaluation of Fracture Behavior of Ceramic Composite Joints by Using a New Interface Potential"]},{"DOI":"10.1109\/eumc.1997.633920","title":["Optical Synthesis Of Microwave Signals"]},{"DOI":"10.4028\/3-908451-27-2.39","title":["Comparison of Optical Properties of Pyrazoline Derivative Nanoparticles"]},{"DOI":"10.5555\/test1007-2013-issue-3"},{"DOI":"10.4028\/0-87849-960-1.2423","title":["Study of Nano-Hydroxyapatite on the Remineralization of Dismineralized Teeth"]},{"DOI":"10.4028\/0-87849-436-7.317","title":["Effect of Rapamycin\/Curcumin Co-Loaded Poly(Lactide-Co-Glycolide) Films on Blood Compatibility and Vascular Smooth Muscle Cell Proliferation"]},{"DOI":"10.4028\/0-87849-412-x.371","title":["Assessment of Local Damage Level in Engineered Cementitious Composites (ECC) Using Stress Wave Propagation"]},{"DOI":"10.4028\/0-87849-978-4.1979","title":["Development of a Fiber-Optic Accelerometer for Third-Party Damage Detection"]},{"DOI":"10.4028\/0-87849-428-6.3514","title":["Luminance Characterization of La<sub>3<\/sub>Ga<sub>5<\/sub>SiO<sub>14<\/sub> Thin Films by Sputtering Deposition"]},{"DOI":"10.1109\/sam.2006.1677165","title":["DSP-Based Dual-Polarity Mass Spectrum Pattern Recognition for Bio-Detection"]},{"DOI":"10.5555\/test_capital2","title":["Journal of Test Deposits"]},{"DOI":"10.4028\/3-908451-24-8.305","title":["The Nonempirical Calculation of the Cation Ordering and Lattice Dynamics in the Solid Solutions of PbSc<sub>1\/2<\/sub>Nb<sub>1\/2<\/sub>O<sub>3<\/sub> and PbSc<sub>1\/2<\/sub>Ta<sub>1\/2<\/sub>O<sub>3<\/sub>"]},{"DOI":"10.4028\/0-87849-959-8.305","title":["Study on the Gas Sensitivity of a CeO<sub>2<\/sub> Based Ceramic Sensing Element: Structure and Characteristic"]},{"DOI":"10.5555\/depositcountissue","title":["Successful Deposit Count Zero"]},{"DOI":"10.4028\/0-87849-967-9.477","title":["Radiation-Induced Graft Polymerization of Maleic Anhydride onto Poly-\u03b2-Hydroxybutyrate"]},{"DOI":"10.4028\/0-87849-425-1.175","title":["Homoepitaxial Growth of 4H-SiC Using a Chlorosilane Silicon Precursor"]},{"DOI":"10.4028\/3-908451-59-0.261","title":["Servomechanical Press: A New Press Concept for Semisolid Forging"]},{"DOI":"10.4028\/0-87849-410-3.1882","title":["Manufacturing Process of Activated Magnesia from Bittern and Dolomite"]},{"DOI":"10.5555\/s0005-1098(00)00106-0","title":["Adaptive estimation of discrete-time systems with nonlinear parameterization"]},{"DOI":"10.2523\/89399-ms","title":["Reaction Kinetics of the Uptake of Chromium(III) Acetate by Polyacrylamide"]},{"DOI":"10.4028\/0-87849-978-4.72","title":["Shot Peening and Fatigue Crack Growth in 7075-T7351 Aluminum"]},{"DOI":"10.1109\/dac.2007.375245","title":["Instruction Splitting for Efficient Code Compression"]},{"DOI":"10.2523\/100050-ms","title":["Detection of Water or Gas Entries in Horizontal Wells From Temperature Profiles"]},{"DOI":"10.4028\/3-908158-03-6.37","title":["Synthesis of YBa<sub>2<\/sub>Cu<sub>3<\/sub>O<sub>7-\u03b4<\/sub> Using Oxalate Precursors and Sol-Gel Method"]},{"DOI":"10.4028\/3-908454-00-x.15","title":["Application of Nitride and Oxynitride Compounds to Various Phosphors for White LED"]},{"DOI":"10.1109\/cacsd.2006.285477","title":["Adaptive PBIL Algorithm and Its Application to Solve Scheduling Problems"]},{"DOI":"10.4028\/0-87849-425-1.1409","title":["Influence of Basal Plane Dislocation Induced Stacking Faults on the Current Gain in SiC BJTs"]},{"DOI":"10.1109\/icee.2008.4585094","title":["On-line Music Beat Tracking with Kalman Filtering and Probability Data Association (KF-PDA)"]},{"DOI":"10.4028\/0-87849-420-0.111","title":["Development of High-Temperature Acoustic Emission Sensor Using Aluminium Nitrade Thin Film"]},{"DOI":"10.1109\/ipemc.2006.297203","title":["Flux-Weakening Characteristics of Trapezoidal Back-EMF Machines in Brushless DC and AC Modes"]},{"DOI":"10.4028\/0-87849-428-6.3145","title":["Self-Healing of Creep Cavities by Boron Segregation and Boron Nitride Precipitation Autonomously Developed during High Temperature Use"]},{"DOI":"10.4028\/0-87849-421-9.165","title":["Study Morphology Transitions in Self-Assembled Triblock Copolymer Thin Films with Nanostructures by AFM"]},{"DOI":"10.4028\/0-87849-444-8.387","title":["Sensor Fault Identification Using Autoregressive Models and the Mutual Information Concept"]},{"DOI":"10.5555\/tm9b6mw","title":["Figure 1: Best practices by industry"]},{"DOI":"10.5555\/book_test","title":["Test Book Web Deposit Form"]},{"DOI":"10.5555\/wersdi29347856","title":["Test Data for NLM article"]},{"DOI":"10.4028\/0-87849-437-5.503","title":["Determination of Strain in Incremental Sheet Forming Process"]},{"DOI":"10.50505\/issntest_0703_test_b","title":["Test article B"]},{"DOI":"10.4028\/0-87849-457-x.825","title":["Solid State MAS-NMR and FTIR Study of Barium Containing Alumino-Silicate Glasses"]},{"DOI":"10.4028\/0-87849-443-x.979","title":["Dislocation Structure of 10\u00b0 Low-Angle Tilt Grain Boundary in \u03b1-Al<sub>2<\/sub>O<sub>3<\/sub>"]},{"DOI":"10.50505\/cr_test_database_home","title":["CrossRef Test DataBase"]},{"DOI":"10.4028\/0-87849-978-4.918","title":["Bonding Parameters of Anisotropic Conductive Adhesive Film and Peeling Strength"]},{"DOI":"10.4028\/3-908451-60-4.130","title":["Modeling of Moment of Friction under Increasing Load Using Artificial Neural Networks"]},{"DOI":"10.4028\/0-87849-443-x.1107","title":["Recrystallization and Mechanical Properties of Hot Rolled Seamless Steel Tubes"]},{"DOI":"10.1109\/dac.2007.375252","title":["Test Generation in the Presence of Timing Exceptions and Constraints"]},{"DOI":"10.4028\/0-87849-439-1.31","title":["Effect of Fluorine and Nitrogen Anions on Properties of Ca-Si-Al-O Glasses"]},{"DOI":"10.4028\/0-87849-462-6.897","title":["Influence of Microshot Peening on Surface Layer Characteristics of Cold Tool Steel"]},{"DOI":"10.5555\/dspace\/15","title":["Report 2020"]},{"DOI":"10.5555\/123455","title":["Testing"]},{"DOI":"10.4028\/0-87849-470-7.900","title":["Finite Element Analysis of Dynamic Characteristics of High-Speed Motorized Spindle"]},{"DOI":"10.5555\/bcmtpue7dw","title":["ROR announces the first Org ID prototype"]},{"DOI":"10.1109\/cacsd.2006.285521","title":["Robust Autotuning of Industrial Regulators Based on Complex Process Models: the DIMC Approach"]},{"DOI":"10.4028\/0-87849-986-5.469","title":["The Research on Failure Diagnosis Method for Engine Crooked Shaft Grinding Equipment"]},{"DOI":"10.5555\/123cvdftgwer_test","title":["test 123"]},{"DOI":"10.5555\/abscd","title":["a chapter to end all chapters"]},{"DOI":"10.1109\/dac.2007.375177","title":["Design and Analysis of Hybrid NEMS-CMOS Circuits for Ultra Low-Power Applications"]},{"DOI":"10.3969\/j.issn.1004-4132.2010.01.001","title":["Approach to blind estimation of the PN sequence in DS-SS signals with residual carrier"]},{"DOI":"10.1109\/icee.2008.4585133","title":["Four-way Video Conference and its Session Control Based on Distributed Mini-MCU in Home Server"]},{"DOI":"10.1109\/ipemc.2006.297094","title":["Dynamic Analysis of PWM Switching DC-DC Converters"]},{"DOI":"10.1109\/epepemc.2006.283294","title":["Advantages and Disadvantages of Reluctance Step Motors in Comparison with Other Design Versions"]},{"DOI":"10.5555\/test_201010041.00","title":["Test article AI"]},{"DOI":"10.4028\/0-87849-992-x.69","title":["Progress of Structural Elucidation of Amorphous Calcium Phosphate(ACP)and Hydroxyapatite (HAp): Disorder and Surfaces as Seen by Solid State NMR"]},{"DOI":"10.4028\/3-908451-06-x.185","title":["Laser Cleaning of Particles from Silicon Wafers: Capabilities and Mechanisms"]},{"DOI":"10.1109\/cacsd.2006.285503","title":["A Numerical Approach to Approximate Feedback Linearization"]},{"DOI":"10.5555\/y5psivbmkx","title":["Test Bar This"]},{"DOI":"10.1109\/ipemc.2006.297088","title":["Study of Measurement Approach of Loop Gain of Converter"]},{"DOI":"10.1109\/eumc.1997.633728","title":["Characterisation Of Schottky Diode Performance By Numerical Simulation Coupled With Harmonic Balance"]},{"DOI":"10.1109\/eumc.1997.631901","title":["Handset Phone-user Interactions: Polarization Effects"]},{"DOI":"10.1109\/isic.2007.4359690","title":["A New Control Algorithm for Robot with Joint Flexibility"]},{"DOI":"10.1109\/eumc.1997.633735","title":["Analysis Of Circular Waveguides With Azimuthally Magnetized Ferrite"]},{"DOI":"10.1109\/isic.2007.4359804","title":["Assist Control Method for Positioning Task Using Master-Slave Manipulators with Flexibility on Slave Arm"]},{"DOI":"10.4028\/0-87849-427-8.381","title":["Perforated FRP Shear Connector for the FRP-Concrete Composite Bridge Deck"]},{"DOI":"10.1109\/dicta.2005.1578165","title":["Estimating the Affine Transformation between Textures"]},{"DOI":"10.4028\/0-87849-992-x.931","title":["Effects of Crude Bone Morphogenetic Protein and Pulp-Capping Materials on Rat Dental Pulp Cell Proliferation and Calcification In Vitro"]},{"DOI":"10.4028\/0-87849-431-6.299","title":["Electromagnetic Absorption Behaviors of Ferromagnetic Fe-Cr Alloy Powder and Polymer Composites in the Radio Frequency Range"]},{"DOI":"10.4028\/0-87849-410-3.262","title":["The Microwave Characteristics of Glass-Ba<sub>2<\/sub>Ti<sub>9<\/sub>O<sub>20<\/sub> Ceramics"]},{"DOI":"10.4028\/3-908451-62-0.85","title":["Mechanical Testing of Diffusion Bonded Metallic Hollow Sphere Structure (MHSS)"]},{"DOI":"10.4028\/0-87849-974-1.349","title":["Ultra-Precision Finishing of Micro Aspherical Surface by Ultrasonic Vibration Assisted Polishing"]},{"DOI":"10.4028\/0-87849-473-1.238","title":["Microwave Sintering of YSZ Electrolyte Materials for SOFC"]},{"DOI":"10.4028\/0-87849-458-8.53","title":["Study on Micro-Feature of Backlight Module for Micro Injection Molding Technology"]},{"DOI":"10.4028\/0-87849-983-0.706","title":["Shear Strength Equation for High-Strength Concrete RC beams with High Strength Stirrup"]},{"DOI":"10.5555\/canary-05","title":["Canary: 87806127-8455-4241-9b05-965653d3bdb3"]},{"DOI":"10.4028\/0-87849-473-1.62","title":["Dielectric Behavior of (1-X)BaTiO<sub>3<\/sub>-XCaCu<sub>2.94<\/sub>Mn<sub>0.06<\/sub>Ti<sub>4<\/sub>O<sub>12<\/sub> Composite Ceramics"]},{"DOI":"10.4028\/0-87849-451-0.142","title":["Preparation and Flame Ablation\/Oxidation Behavior of ZrB<sub>2<\/sub>\/SiC Ultra-High Temperature Ceramic Composites"]},{"DOI":"10.4028\/0-87849-428-6.1","title":["Compelling Global Issues in Science and Technology and the Role of Materials Science"]},{"DOI":"10.4028\/3-908451-22-1.297","title":["Fabrication and Physical Properties of SiC-GaAs Nano-Composites"]},{"DOI":"10.4028\/0-87849-961-x.309","title":["Method for Tailoring and Control the Morphology, Size and Porosity of Calcium Phosphate Granules"]},{"DOI":"10.4028\/0-87849-456-1.248","title":["Ductile Crack Propagation Characteristics in Thin Steel Tubes"]},{"DOI":"10.4028\/0-87849-990-3.841","title":["Ultrasonic Welding of Aluminum and Silicon Wafer"]},{"DOI":"10.1109\/dicta.2005.1578107","title":["Simultaneous Estimation of Camera Response Function, Target Reflectance and Irradiance Values"]},{"DOI":"10.4028\/0-87849-963-6.709","title":["Characterization of 4H-SiC MOS Structures with Al<sub>2<\/sub>O<sub>3<\/sub> as Gate Dielectric"]},{"DOI":"10.4028\/0-87849-978-4.1321","title":["Effect of Particle Impact Velocity on Cone Crack Shape in Ceramic Material"]},{"DOI":"10.4028\/0-87849-964-4.143","title":["Locally Initiated Elastic Waves in 2D Metals"]},{"DOI":"10.4028\/0-87849-448-0.165","title":["Wire Cable Failures in Climbing Anchor Chocks"]},{"DOI":"10.4028\/0-87849-430-8.291","title":["A Novel Micro-Dissection Method Using Ultrasonic Vibration for Molecular Analysis"]},{"DOI":"10.4028\/0-87849-436-7.601","title":["Study of Biodegradation of Pure Magnesium"]},{"DOI":"10.4028\/0-87849-472-3.53","title":["Investigation of Mechanical Property and Thermal Shock Behavior of Machinable B<sub>4<\/sub>C\/BN Ceramics Composites"]},{"DOI":"10.4028\/0-87849-986-5.118","title":["Research on Genetic Optimization of Special Spiral Rod Grinding Process"]},{"DOI":"10.4028\/0-87849-410-3.1646","title":["Preparation and Characterization of Biodegradable \u03b2-TCP-Based Composite Microspheres as Bone Tissue Engineering Scaffolds"]},{"DOI":"10.4028\/0-87849-456-1.1584","title":["The Group Velocity Change in the Unidirectional Composite Materials"]},{"DOI":"10.5555\/demo_1.3","title":["Core.rdf"]},{"DOI":"10.4028\/3-908451-31-0.1697","title":["Effect of Curvature on Gas-Particle Flow in Converging and Diverging Supersonic Nozzle"]},{"DOI":"10.4028\/3-908451-12-4.1","title":["X-Rays at the SIAM Photon Source"]},{"DOI":"10.4028\/0-87849-985-7.267","title":["Monotonic and Cyclic Behavior of Ultrafine Grain Metals:Overview"]},{"DOI":"10.4028\/3-908158-01-x.1680","title":["Influence of Grain Size Distribution on Hardness and Fracture Toughness of Si<sub>3<\/sub>N<sub>4<\/sub>\/SiC Nanocomposites"]},{"DOI":"10.4028\/0-87849-961-x.301","title":["Preparation of Poly(Lactic Acid) Composite Hollow Spheres with an Open Channel"]},{"DOI":"10.4028\/3-908451-21-3.442","title":["Optimization of Weighting and Labeling Process"]},{"DOI":"10.4028\/0-87849-473-1.47","title":["Synthesis, Characterization and Electrical Properties of Barium Titanate Films Fabricated by Hydrothermal Method"]},{"DOI":"10.4028\/0-87849-422-7.1255","title":["The Influence of Antagonist Radii on Friction and Wear of Dental Ceramics"]},{"DOI":"10.4028\/0-87849-958-x.569","title":["Growth and Reproduction of Porphyra Kuniedae Kurogi (Bangiales, Rhodophyta) from Korea"]},{"DOI":"10.4028\/0-87849-960-1.925","title":["In Situ Synthesis and Properties of Aluminum Composites with Ultrafine TiB<sub>2<\/sub> and Al<sub>2<\/sub>O<sub>3<\/sub> Particulates"]},{"DOI":"10.4028\/0-87849-971-7.253","title":["Evidence of Dopant-Matrix Interaction in Optical Spectra of Rare Earth Ions"]},{"DOI":"10.4028\/0-87849-443-x.1035","title":["A Texture Component Model for Predicting Recrystallization Textures"]},{"DOI":"10.4028\/0-87849-999-7.406","title":["Study on Mechanical Properties of Cermet Materials Fabricated from Ternary Boride Cladding on Both Sides Surface of Steel Substrate"]},{"DOI":"10.4028\/0-87849-408-1.871","title":["Influence of Scandium Addition on the High Temperature Compressive Strength of Aluminium Alloy 7010"]},{"DOI":"10.4028\/0-87849-443-x.345","title":["3D Spatial Distribution of Nuclei in 90% Cold Rolled Aluminium"]},{"DOI":"10.4028\/0-87849-469-3.205","title":["Microstructure and Mechanical Properties of Electrodeposited Nickel and its Particle-Reinforced Nanocomposite"]},{"DOI":"10.4028\/0-87849-443-x.1309","title":["Formation of Ultra Fine Grained Structure during Annealing of Heavily Drawn Metastable Austenitic Steel Wire"]},{"DOI":"10.4028\/0-87849-968-7.89","title":["On Specific Features of Operating Crucibleless Salt-Bath Furnaces"]},{"DOI":"10.4028\/0-87849-982-2.215","title":["Development of New Preparation Method for nm-Sized Barium Titanate Particles"]},{"DOI":"10.4028\/0-87849-989-x.309","title":["A Viscoelastic Continuum Damage Model for Reinforced Concrete Subjected to Shock Loading"]},{"DOI":"10.4028\/0-87849-469-3.289","title":["Fractal Analysis of Fragmentation Patterns of Glass Plates"]},{"DOI":"10.4028\/3-908158-01-x.1799","title":["Ceramic Materials for Mass-Sensitive Sensors - Detection of VOCs and Monitoring Oil Degradation"]},{"DOI":"10.4028\/0-87849-428-6.2339","title":["Life-Cycle Evaluation of Ecobalance Performance of Ecomaterial-Type Building Materials by Multiple Eco-Indicator Method"]},{"DOI":"10.4028\/0-87849-436-7.889","title":["Well Defined Surface Preparation with Phospholipid Polymers for Highly Sensitive Immunoassays"]},{"DOI":"10.4028\/0-87849-452-9.509","title":["Research on isc Operon in <i>Acidithiobacillus ferrooxidans<\/i> ATCC 23270"]},{"DOI":"10.4028\/0-87849-972-5.591","title":["Microstructural Changes Determining Joint Strength in Friction Stir Welding of Aluminium Alloys"]},{"DOI":"10.4028\/0-87849-970-9","title":["Functionally Graded Materials VIII"]},{"DOI":"10.4028\/0-87849-960-1.3605","title":["The Fabrication and Performance of CVD Diamond-Based X-Ray Detectors"]},{"DOI":"10.4028\/0-87849-425-1.263","title":["6H-SiC Homoepitaxial Growth and Optical Property of Boron- and Nitrogen-Doped Donor-Acceptor Pair (DAP) Emission of 1\u00ba-Off Substrate by Closed-Space Sublimation Method"]},{"DOI":"10.4028\/0-87849-999-7.230","title":["Electronic Subdividing Method for Linear Encoder of High Speed Position Detection"]},{"DOI":"10.4028\/0-87849-427-8.917","title":["Elasticity Solution of Laminated Cylindrical Shell with Piezoelectric Layer under Local Ring Load"]},{"DOI":"10.1109\/eumc.1997.633783","title":["Wideband Indoor Radio Channel Measurements At 5.3 GHz"]},{"DOI":"10.4028\/0-87849-997-0.83","title":["The Effect of Tungsten Addition on the Thermal Stability and Microstructure in the Electroless Ni-P-W Composite Coating"]},{"DOI":"10.4028\/3-908158-01-x.1109","title":["Application of X-Ray Microtomography to the Microstructural Characterization of Al-Based Functionally Graded Materials"]},{"DOI":"10.4028\/3-908451-39-6.111","title":["Analysis of Oxygen Segregation at Metal-Oxide Interfaces Using a New Lattice Monte Carlo Method"]},{"DOI":"10.4028\/0-87849-466-9.103","title":["Microstructure of Rapidly Solidified Ti-46Al-2Cr-2Nb-xY Alloys"]},{"DOI":"10.4028\/3-908451-35-3.183","title":["Diffusional Growth Kinetics of Boride Layers at the 13% Cr Steel Interface with Amorphous Boron"]},{"DOI":"10.4028\/3-908451-31-0.759","title":["Synthesis of Bio-Glass Ceramics in Na<sub>2<\/sub>O-CaO-SiO<sub>2<\/sub>-P<sub>2<\/sub>O<sub>5<\/sub> System with Fluoride Additives"]},{"DOI":"10.4028\/3-908451-26-4.433","title":["Evaluation of Strip Rolling Directly from the Semi-Solid State"]},{"DOI":"10.4028\/3-908451-31-0.1181","title":["Control of Microstructures and Textures in Nanocrystalline Fe-50wt%Ni Foil"]},{"DOI":"10.4028\/0-87849-463-4.27","title":["Continuous Cooling Transformation Behavior of High Strength Low-Alloyed Cold Rolled Sheet Steel"]},{"DOI":"10.4028\/0-87849-414-6.323","title":["Residual Stress Prediction and Relaxation in Welded Tubular Joints under Constant Cyclic Loading"]},{"DOI":"10.4028\/0-87849-986-5.127","title":["Development of Grinding Temperature Measuring System Considering Compensation of Thermocouple Dynamic Responding Error"]},{"DOI":"10.4028\/0-87849-432-4.387","title":["Superplastic Forming Limit and Instability of AZ31B Sheet"]},{"DOI":"10.4028\/0-87849-456-1.166","title":["The Effect of Different Material Parameter Functions in Non-Homogeneous Regions on Eigen-Functions of Crack Tip Fields"]},{"DOI":"10.4028\/0-87849-458-8.1009","title":["Investigation of the Chip Types in High Speed Machining of SKD11 Steel"]},{"DOI":"10.4028\/0-87849-428-6.3359","title":["Texture of AZ31 Magnesium Alloy Sheet Heavily Rolled by High Speed Warm Rolling"]},{"DOI":"10.3969\/j.issn.1004-4132.2011.01.005","title":["Output feedback based adaptive robust fault-tolerant control for a class of uncertain nonlinear systems"]},{"DOI":"10.4028\/0-87849-408-1.437","title":["3DAP Analysis and Computer Simulation of Nanocluster Formation in the Initial Aging Stage of Al-Zn Alloys"]},{"DOI":"10.4028\/3-908451-55-8.61","title":["Mechano-Chemistry; Interdiffusion in Solid Solutions"]},{"DOI":"10.4028\/0-87849-423-5.395","title":["Synthesis of Ceramic Powders Based on Manganese, Cobalt and Nickel Oxides"]},{"DOI":"10.1109\/icee.2008.4585211","title":["Context-Aware Middle w are for Mobile Phone Based on Operational Logs"]},{"DOI":"10.4028\/0-87849-436-7.333","title":["Optimization of Scaffold for a Successful Hydrogel-Seeding Method for Vascular Tissue Engineering"]},{"DOI":"10.4028\/3-908451-51-5.150","title":["Concentration Dependent Diffusion in Building Materials \u2013 Application of Different Methods"]},{"DOI":"10.4028\/3-908451-51-5.113","title":["Electro-Diffusion in Multicomponent Ion-Selective Membranes; Numerical Solution of the Coupled Nernst\u2013Planck\u2013Poisson Equations"]},{"DOI":"10.1109\/icse.1999.841031","title":["Patterns in property specifications for finite-state verification"]},{"DOI":"10.4028\/0-87849-971-7.417","title":["Application of the Master Sintering Curve Theory to Non-Isothermal Sintering of BaTiO<sub>3<\/sub> Ceramics"]},{"DOI":"10.3969\/j.issn.1004-4132.2011.02.011","title":["Information rough communication based on both-branch fuzzy set"]},{"DOI":"10.4028\/0-87849-975-x.1633","title":["Synchrotron Radiation Investigation of Twinning in Extruded Magnesium Alloy AZ3l"]},{"DOI":"10.3969\/j.issn.1004-4132.2011.05.015","title":["H<inf>∞<\/inf>-based fault detection for nonlinear networked systems with random packet dropout and probabilistic interval delay"]},{"DOI":"10.1109\/9780470547212.refs","title":["Publications by the Author Concerning Transmission Lines"]},{"DOI":"10.4028\/3-908451-50-7.83","title":["Studies on the Fabrication and Stab Resistance Characterization of Novel Thermoplastic-Kevlar Composites"]},{"DOI":"10.3969\/j.issn.1004-4132.2011.03.020","title":["Adaptive neural control for a class of uncertain stochastic nonlinear systems with dead-zone"]},{"DOI":"10.1109\/pcee.2004.1335612","title":["Network application driven instruciton set extensions for embedded processing clusters"]},{"DOI":"10.1109\/dac.2007.375303","title":["Automated Design of Misaligned-Carbon-Nanotube-Immune Circuits"]},{"DOI":"10.4028\/0-87849-408-1.597","title":["The Effect of Alloying Additions on Vacancy Behaviour in Aluminium-Copper Alloys"]},{"DOI":"10.3969\/j.issn.1004-4132.2010.06.015","title":["Quantized dynamic output feedback control for networked control systems"]},{"DOI":"10.1109\/cca.2006.286068","title":["Linear Optimal Estimation Algorithms Based on the Monte Carlo Method and Neural Networks for Nonlinear Navigational Problems"]},{"DOI":"10.4028\/0-87849-973-3.54","title":["Thermography and Simulation as a Combined Method for Failure Analysis of PTCs"]},{"DOI":"10.4028\/0-87849-432-4.417","title":["Diffusion Bonding of Magnesium, Zirconium and Titanium as Implant Material"]},{"DOI":"10.4028\/0-87849-422-7.349","title":["Effect of Dehydration Methods on Mechanical Strength of Nanohydroxyapatite\/Collagen Composites"]},{"DOI":"10.4028\/0-87849-443-x.223","title":["In Situ EBSP Observations of Recrystallization in Commercial Purity Aluminum"]},{"DOI":"10.4028\/0-87849-428-6.983","title":["Creep Properties of Alborex Reinforced AZ31 Matrix Mg Composites Containing Ag"]},{"DOI":"10.4028\/0-87849-412-x.835","title":["NDT Analysis of Metal Materials with Internal Defects Using Active Infrared Thermography Method"]},{"DOI":"10.3969\/j.issn.1004-4132.2010.04.014","title":["Technology of structure damage monitoring based on multi-agent"]},{"DOI":"10.1714\/3291.31990","title":["10.1714\/3291.31990"]},{"DOI":"10.4028\/0-87849-957-1.91","title":["The Role of Niobium in Cold Rolled TRIP Steel"]},{"DOI":"10.4028\/0-87849-981-4.471","title":["Advanced Metallic Structural Materials and a New Role for Microalloyed Steels"]},{"DOI":"10.4028\/0-87849-440-5.625","title":["Slope Stability Analysis by Strength Reduction Elasto-Plastic FEM"]},{"DOI":"10.5555\/annual_report_on_cats","title":["The Annual Report on Cats"]},{"DOI":"10.5555\/book-digital-model-9950-20260722162644","title":["test: Administrative continuity within the Landsraad despite recurring prophetic interruptions"]},{"DOI":"10.5555\/chapter-2-formal-article-3936-20260814125434","title":["book chapter: Comparative analysis of abandoned apartments with statistically improbable levels of silence"]},{"DOI":"10.4028\/0-87849-430-8.177","title":["Static Characteristic Analysis of a 3-DOF Micropositioning Table for Grinding"]},{"DOI":"10.4028\/0-87849-991-1.1","title":["Metallurgy in Space"]},{"DOI":"10.5555\/s0005-1098(01)00002-4","title":["Constructive nonlinear control: a historical perspective"]},{"DOI":"10.5555\/final_001"},{"DOI":"10.5555\/article-quiet-survey-9042-20260818111204","title":["journal-article: Reconstructing forgotten civilizations from footnotes with restrained confidence"]},{"DOI":"10.1109\/dac.2007.375195","title":["Characterizing Process Variation in Nanometer CMOS"]},{"DOI":"10.1109\/dac.2007.375277","title":["A General Framework for Spatial Correlation Modeling in VLSI Design"]},{"DOI":"10.1109\/cacsd.2006.285501","title":["SIMULINK?-based Tools for Creating and Simulating Interconnected LFR objects"]},{"DOI":"10.1109\/dac.2007.375247","title":["Efficient Computation of Buffer Capacities for Cyclo-Static Dataflow Graphs"]},{"DOI":"10.1215\/9780822393337-046","title":["The Two Gentlemen of Verona"]},{"DOI":"10.1215\/9780822393337-032","title":["The Rape of Lucrece"]},{"DOI":"10.1215\/9780822393337-020","title":["A Lover\u2019s Complaint"]},{"DOI":"10.5555\/chapter-3-digital-analysis-1321-20261012182710","title":["book chapter: Memory persistence in wells that appear only after sufficient solitude"]},{"DOI":"10.4028\/3-908454-01-8.111","title":["Diamond-Based Metal Matrix Composites for Thermal Management Made by Liquid Metal Infiltration \u2014 Potential and Limits"]},{"DOI":"10.3969\/j.issn.1004-4132.2011.01.003","title":["Diagnosis of process faults and sensor faults in a class of nonlinear uncertain systems"]},{"DOI":"10.5555\/soy-el-new-grant"},{"DOI":"10.3969\/j.issn.1004-4132.2011.04.008","title":["Ranking approach of cross-efficiency based on improved TOPSIS technique"]},{"DOI":"10.4028\/0-87849-972-5.697","title":["Analyses of the Forming Limit Diagram in Digital Environment"]},{"DOI":"10.4028\/0-87849-463-4.1165","title":["Nanoindentation Characterization of Mechanical Properties of Ferrite and Austenite in Duplex Stainless Steel"]},{"DOI":"10.32013\/12345678","title":["When your best metadata isn't good enough: working with an imperfect specification"]},{"DOI":"10.4028\/0-87849-425-1.1351","title":["Demonstration of a 4H SiC Betavoltaic Cell"]},{"DOI":"10.4028\/0-87849-990-3.115","title":["Micro-Anode Guided Electroplating (MAGE) Control System"]},{"DOI":"10.2523\/89462-ms","title":["Dewatering in Hunton Reservoir\u2014Drill Vertical or Horizontal Well?"]},{"DOI":"10.1109\/icee.2008.4585192","title":["Protection of Window Med ia Video by Faked FourCC"]},{"DOI":"10.5555\/2342342","title":["Hello 2"]},{"DOI":"10.4028\/0-87849-470-7.905","title":["Analyze of Clamp Rod on Spring Tube Stiffness Measurement"]},{"DOI":"10.1109\/isic.2007.4359811","title":["Control Experiment on Pickup Head Flying above Rotating Disk"]},{"DOI":"10.4028\/3-908451-56-6","title":["Theory, Modeling and Numerical Simulation"]},{"DOI":"10.4028\/0-87849-414-6.479","title":["Experimental Study of the Influence of a Trailing Heat Sink on the Welding Residual Stress Distribution"]},{"DOI":"10.4028\/0-87849-968-7.161","title":["Effects of Nd on the Microstructure and Mechanical Property of ZA52 Alloy"]},{"DOI":"10.4028\/3-908454-00-x.245","title":["Fabrication of AlN Ceramics Using AlN and Nano-Y<sub>2<\/sub>O<sub>3<\/sub> Composite Particles Prepared by Mechanical Treatment"]},{"DOI":"10.1109\/isic.2007.4359700","title":["Adaptive Neural Network Control for Marine Shafting System Using Dynamic Surface Control"]},{"DOI":"10.4028\/0-87849-958-x.12","title":["Tissue-Engineered Skin Substitutes Using Collagen Scaffold with Amniotic Membrane Component"]},{"DOI":"10.2523\/89419-ms","title":["Measurement of Three-Phase Relative Permeability with IFT Variation"]},{"DOI":"10.4028\/0-87849-442-1.823","title":["Numerical Investigation of the DC and RF Performances for a 4H-SiC Double Delta-Doped Channel MESFET Having Various Delta-Doping Concentrations"]},{"DOI":"10.4028\/0-87849-414-6.153","title":["Relaxation of Residual Stresses in and around Mechanical Fasteners Due to Fatigue Loading"]},{"DOI":"10.4028\/0-87849-428-6.1685","title":["Mechanical Properties and Damping Behavior of Magnesium Alloys Processed by Equal Channel Angular Pressing"]},{"DOI":"10.4028\/0-87849-456-1.392","title":["Strength and Toughness of 1.1wt% Li-Containing Al-Zn-Mg-Cu Alloys"]},{"DOI":"10.3969\/j.issn.1004-4132.2011.06.018","title":["Extraction of affine invariant features for shape recognition based on ant colony optimization"]},{"DOI":"10.4028\/0-87849-968-7.49","title":["Management and Recycle of Magnesium Alloy Scraps in Die Casting Factory"]},{"DOI":"10.1109\/icse.1999.841040","title":["Coca: an automated debugger for C"]},{"DOI":"10.1109\/isdrs.2009.5378287","title":["Effects of non-uniformly doped substrate on gate C-V characteristics of MOS devices with ultrathin (~ 1nm) gate dielectrics: A QM study"]},{"DOI":"10.50505\/gxc229hw","title":["Test Publication"]},{"DOI":"10.5555\/byqxd3r9d9","title":["How funding agencies can meet OSTP (and Open Science) guidance using existing open infrastructure"]},{"DOI":"10.5555\/test0612","title":["On the power, wisdom and goodness of God, as manifested in the adaptation of external nature to the moral and intellectual constitution of man. test ticket 8744"]},{"DOI":"10.1109\/ipemc.2006.297188","title":["Solving Induction Motor Equivalent Circuit using Numerical Methods for an In-Service and Nonintrusive Motor Efficiency Estimation Method"]},{"DOI":"10.4028\/0-87849-412-x.1495","title":["The Evolution of Contact Stress and Surface Profile in Press-Fitted Shaft under Partial Slip Conditions"]},{"DOI":"10.4028\/0-87849-456-1.762","title":["Study on Characteristics of Vibration Friction for Pile-Soil System"]},{"DOI":"10.4028\/0-87849-960-1.463","title":["Effect of Section Thicknesses on Tensile Behavior and Microstructure of High Pressure Die Cast Magnesium Alloy AM50"]},{"DOI":"10.4028\/0-87849-960-1.9","title":["Impact of a Combined Use of Focused Ion Beam Technique and Transmission Electron Microscopy on Materials Characterization"]},{"DOI":"10.4028\/0-87849-961-x.683","title":["Preparation of Hydroxyapatite Ceramic Unit with a Trap for 2-D Cultured Cells"]},{"DOI":"10.4028\/0-87849-470-7.697","title":["An Integrated Modeling Method for an Engine Cylinder Body Based on Cross-Sectional Imaging System"]},{"DOI":"10.4028\/3-908451-26-4.34","title":["Semi Solid Casting and Forging of Steel"]},{"DOI":"10.4028\/0-87849-992-x.333","title":["Effect of Electrical Polarization on the Behavior of Bioactive Glass Containing MgO and B<sub>2<\/sub>O<sub>3<\/sub> in SBF"]},{"DOI":"10.1109\/isic.2007.4359815","title":["Discrete Entropy and Relative Entropy Study on Nonlinear Clustering of Underwater and Arial Images"]},{"DOI":"10.4028\/0-87849-981-4.187","title":["Aspects of Production Hot Rolling of Nb Microalloyed High Al High Strength Steels"]},{"DOI":"10.4028\/0-87849-990-3.1159","title":["Coordinated Motion Control of Large-Scale Transporter for Conveying Heavy Frame Components in Ship-Manufacturing"]},{"DOI":"10.4028\/3-908451-27-2","title":["Nanocomposites and Nanoporous Materials VII"]},{"DOI":"10.1109\/icse.1999.841065","title":["Software process support over the Internet"]},{"DOI":"10.4028\/0-87849-433-2.1163","title":["Genetic Analysis of Concrete Crack in Hydroelectric Station's Plant Based on FEM"]},{"DOI":"10.4028\/3-908158-01-x.1411","title":["Spark Plasma Synthesis\/Sintering of Dense Ceramic, Intermetallic and Composite Materials"]},{"DOI":"10.4028\/0-87849-456-1.1798","title":["Research on Surface Low Alloy HSS by Plasma Surface Metallographic W, MO, C Alloying"]},{"DOI":"10.50505\/example2","title":["What's up buttercup"]},{"DOI":"10.4028\/0-87849-458-8.7","title":["Fabrication of Light Guide Plate on PDMS-Based Using MEMS Technique for Application of LED-Backlight"]},{"DOI":"10.5555\/new-grant-1909"},{"DOI":"10.1109\/eumc.1997.632071","title":["Monolithic Low Voltage Power Amplifier For Portable Low Range Transceiver"]},{"DOI":"10.4028\/0-87849-422-7.219","title":["Dialysis Preparation of Zinc-Substituted Nano-Hydroxyapatite and Its Characterization"]},{"DOI":"10.1109\/eumc.1997.633903","title":["Modeling Of Multichip Module Interconnections By The TLM Method And System Identification"]},{"DOI":"10.1109\/isic.2007.4359830","title":["Integrated Fault Diagnosis Based on Petri Net Models"]},{"DOI":"10.4028\/0-87849-977-6.667","title":["Eddy Current Testing Using a Model Based Measurement Method"]},{"DOI":"10.1109\/icee.2008.4585204","title":["Development of HDD\/D VD Hybrid Camcorder"]},{"DOI":"10.4028\/0-87849-458-8.315","title":["Laser Patterning Indium Tin Oxide Thin Films on Glass Substrate"]},{"DOI":"10.1109\/eumc.1997.633703","title":["A Novel Low Noise Active Circuit Replacement Criteria For Parallel FED Large Scale Active Antenna Arrays"]},{"DOI":"10.1109\/isic.2007.4359588","title":["A Hybrid Model of a Brushless DC Motor"]},{"DOI":"10.2523\/99757-ms","title":["Comparison of Secondary and Tertiary Recovery With Change in Injection Brine \nComposition for Crude Oil\/Sandstone Combinations"]},{"DOI":"10.4028\/0-87849-465-0.237","title":["Mechanical Changes in Materials Caused by Explosive Precompression Shock Waves and the Effects on Fragmentation of Exploding Cylinders"]},{"DOI":"10.4028\/0-87849-960-1.3431","title":["Ti-Based Bulk Metallic Glass with High Cold Workability at Room Temperature"]},{"DOI":"10.4028\/3-908451-53-1.35","title":["Low Temperature Kinetics of In-Cd Solid Solution Decomposition"]},{"DOI":"10.4028\/0-87849-960-1.2469","title":["Hydrogen-Induced Amorphization in C15 Laves Phase DyCo<sub>2<\/sub> Studied by Pressure Calorimetry"]},{"DOI":"10.4028\/0-87849-456-1.2471","title":["Research on the Control Function and Control Arithmetic of Automobile Automatic Brake"]},{"DOI":"10.4028\/0-87849-419-7.1321","title":["Improved Magnetic Properties of Silicon-Iron Alloy Powder Core"]},{"DOI":"10.4028\/3-908158-01-x.2545","title":["Large Magnetoresistance at Oxide La<sub>0.7<\/sub>Ca<sub>0.3<\/sub>MnO<sub>3<\/sub> and YBa<sub>2<\/sub>Cu<sub>3<\/sub>O<sub>7<\/sub> Interfaces"]},{"DOI":"10.4028\/0-87849-428-6.1729","title":["Effect of Solidification Grain Refinement on the Development of Wrought Mg Alloys"]},{"DOI":"10.4028\/0-87849-964-4.275","title":["Microstructure and Creep Properties of AISI 316LN Steels with Niobium Additions"]},{"DOI":"10.4028\/0-87849-449-9.147","title":["Investigation of the Oxide Ion Conduction Mechanism in LaGaO<sub>3<\/sub>-Based Electrolytes through High-Temperature Neutron Powder Diffraction"]},{"DOI":"10.4028\/0-87849-455-3.57","title":["Selective Strain Hardening of Structure Components by Action Media Based Cold Massive Forming"]},{"DOI":"10.4028\/0-87849-432-4.1563","title":["Distortion Simulation of Unsymmetrical Composite Laminates Using the Finite Element Analysis Method"]},{"DOI":"10.4028\/0-87849-433-2.649","title":["Forming Load Characteristics of Forward and Backward Tube Extrusion Process in Combined Operation"]},{"DOI":"10.4028\/3-908158-01-x.639","title":["Pressureless Sintering of AIN"]},{"DOI":"10.4028\/0-87849-977-6.575","title":["A White Light Interference Distributed Optical Fiber Temperature Sensor"]},{"DOI":"10.4028\/0-87849-456-1.1704","title":["Prevention of Stress Corrosion Cracking in Welded Joint of Type 304 Stainless Steel by Laser Peening"]},{"DOI":"10.4028\/0-87849-462-6.127","title":["Industrial Application in 2014 T6 Aluminum Alloys Having High Corrosion and Weather Resistant by Anionic Resin Coating with Mirror Luster"]},{"DOI":"10.4028\/0-87849-992-x.511","title":["RF Induction Plasma Synthesized Calcium Phosphate Nanoparticles"]},{"DOI":"10.5555\/jlxwnevt5z","title":["CrossTech"]},{"DOI":"10.4028\/3-908158-01-x.2218","title":["Properties of Wastes-Based Extruded Ceramics Formulations"]},{"DOI":"10.4028\/0-87849-463-4.723","title":["Glass Transition within the Cluster Variation Approximation"]},{"DOI":"10.4028\/0-87849-969-5.340","title":["The Effect of Fatigue on Residual Peening Stresses in Aerospace Components"]},{"DOI":"10.4028\/0-87849-415-4.635","title":["A Study on Speed Elevation Possibility at the Connection between High Speed Lines and Conventional Lines with Korean High Speed Train"]},{"DOI":"10.4028\/3-908451-38-8.25","title":["Growth and Properties of Ytterbium Doped KY(WO<sub>4<\/sub>)<sub>2<\/sub> Nanocomposites"]},{"DOI":"10.4028\/0-87849-975-x.725","title":["Texture Control in Silver"]},{"DOI":"10.4028\/0-87849-469-3.193","title":["Structural Non-Homogeneity and Thermal Instability of ECAP Aluminium"]},{"DOI":"10.4028\/0-87849-470-7.855","title":["Laser Sintering of Reconstituted Nanostructured PSZ Feedstock Powders"]},{"DOI":"10.4028\/0-87849-978-4.137","title":["Fracture Toughness of Liquid Phase Sintered SiC by Using Indentation Fracture Method"]},{"DOI":"10.4028\/3-908451-46-9.33","title":["Passivation Studies of Germanium Surfaces"]},{"DOI":"10.1109\/isic.2007.4359773","title":["On Estimation of Plant Dynamics and Disturbance from Input-Output Data in Real Time"]},{"DOI":"10.5555\/testarticle101","title":["test article doi"]},{"DOI":"10.4028\/0-87849-985-7.961","title":["Effect of Severe Plastic Deformation on the Structure and Properties of the Age-Hardenable Mg-Sm Alloys"]},{"DOI":"10.4028\/0-87849-463-4.481","title":["Optimization of Laser-Arc Interspacing Distance during CO2 Laser-GMA Hybrid Welding by Using High-Speed Imaging"]},{"DOI":"10.4028\/0-87849-454-5.223","title":["Fabrication of Highly Electroconductive Ceramics by Spark Plasma Sintering of Si<sub>3<\/sub>N<sub>4<\/sub>-Based Particles Coated with Nanosized TiN Prepared via Chemical Route"]},{"DOI":"10.4028\/0-87849-456-1.1350","title":["Mechanical Alloying Influence on the Sintering of Cu-Fe Compound Powders"]},{"DOI":"10.4028\/0-87849-461-8.55","title":["Research on Technology and Application of Pulse Electrochemical Finishing"]},{"DOI":"10.4028\/0-87849-969-5.539","title":["The Connection between Micro-Residual Stress and Thermo-Mechanical Treatments in 6061Al-15vol%SiC<sub>w<\/sub> Composites"]},{"DOI":"10.4028\/3-908451-31-0.1765","title":["Preparation of Silica-Supported Nickel Molybdenum Phosphides by Temperature-Programmed Reduction Technique"]},{"DOI":"10.4028\/0-87849-444-8.153","title":["Monitoring of Growing Fatigue Damage Using the E\/M Impedance Method"]},{"DOI":"10.4028\/0-87849-960-1.3389","title":["Influence of Nb on the Interface Structure of Tungsten Fiber Reinforced Zr-Based Bulk Metallic Glass Composites"]},{"DOI":"10.2118\/98178-ms","title":["Radiotracer Applications in Reservoir Evaluation"]},{"DOI":"10.4028\/0-87849-959-8.211","title":["Dielectric and Piezoelectric Properties of Praseodymium Modified Lead Zirconate Titanate Ceramics"]},{"DOI":"10.1037\/e613382011-001","title":["Minerva Research Initiative (MRI)"]},{"DOI":"10.4028\/0-87849-410-3.763","title":["Resistivity-Temperature Properties of La(Ti<sub>x<\/sub>Mn<sub>1-x<\/sub>)O<sub>3<\/sub> Ceramics"]},{"DOI":"10.4028\/0-87849-960-1.555","title":["The Joint Characteristics of Friction Stir Welded Mg-Zn-Y Alloy"]},{"DOI":"10.4028\/3-908158-09-5.74","title":["Nanotechnology-Based Cell Sheet Engineering for Regenerative Medicine"]},{"DOI":"10.4028\/3-908451-51-5.394","title":["Evaluation of Transmission Conditions for Thin Reactive Heat-Conducting Interphases"]},{"DOI":"10.4028\/0-87849-462-6.1945","title":["Study on the Wrinkling and Edge Irregularity during Bending of a Roll-Formed Plate"]},{"DOI":"10.4028\/3-908454-01-8.76","title":["Al Si Oxide Coating as Ttritium Penetration Barrier on 316L Stainless Steel Prepared by a Combined Process"]},{"DOI":"10.4028\/0-87849-975-x.1091","title":["A Texture Based Model for Polycrystal Plasticity"]},{"DOI":"10.4028\/0-87849-428-6.1559","title":["Thermo-Mechanical Fatigue Behaviour of the Gamma-Titanium Aluminide TNB-V5 with Near-Gamma Microstructure"]},{"DOI":"10.4028\/0-87849-456-1.1165","title":["Investigation to the Effects of Grain Misorientation on the Performance of Short Cracks"]},{"DOI":"10.4028\/0-87849-989-x.399","title":["Damage Evaluation of Subsurface Defect in Sandwich by Phase-Shifting Digital Shearography"]},{"DOI":"10.4028\/0-87849-410-3.1711","title":["Bisphosphonate Pamidronate Modifying Hydroxyapatite Bioceramics for Hard Tissue Repair"]},{"DOI":"10.4028\/0-87849-960-1.373","title":["Deformation Behaviors of 6061 and 7075 Aluminum Tubes at Elevated Temperatures for Warm Hydroforming"]},{"DOI":"10.4028\/0-87849-999-7.612","title":["Ultra-Speed Plastic Deformation of TC6 Sheet Induced by Laser Shock Loading"]},{"DOI":"10.4028\/0-87849-989-x.495","title":["Hybrid Finite-Discrete Element Simulation of Crack Propagation under Mixed Mode Loading Condition"]},{"DOI":"10.4028\/0-87849-416-2.131","title":["Effects of ELID on High Speed Grinding of Partially Stabilized Zirconia"]},{"DOI":"10.4028\/0-87849-978-4.2158","title":["Structural Health Monitoring of Composite Laminates by Using Embedded FBG Optical Fiber Sensors"]},{"DOI":"10.4028\/3-908451-31-0.1733","title":["Nanoporous SiC Membrane Derived from Preceramic Polymer"]},{"DOI":"10.4028\/0-87849-421-9.480","title":["Effects of CH<sub>4<\/sub> Concentration on CVD Diamond Coatings Deposited on Cemented Carbide Cutting Cools"]},{"DOI":"10.4028\/0-87849-428-6.3789","title":["Relation between Strength and Microstructure in Friction Stir Welded Joints of A383 and A5052 Aluminum Alloys"]},{"DOI":"10.4028\/0-87849-456-1.2273","title":["The Quantitative Measurement Model of ACFM Based on Swept Frequency Method"]},{"DOI":"10.4028\/0-87849-454-5.89","title":["Solution Growth of Single Crystalline 6H-SiC from Si-Ti-C Ternary Solution"]},{"DOI":"10.5555\/51-2","title":["Testing new deposit code"]},{"DOI":"10.4028\/0-87849-992-x.1285","title":["Zirconia Knee Wear and Raman Spectroscopy Studies Compares 3.5-Mrad and 7-Mrad UHMWPE Inserts"]},{"DOI":"10.4028\/0-87849-462-6.1345","title":["Microstructure and Mechanical Properties in Friction Stir Processed Zr-Al-Ni-Cu Bulk Metallic Glass"]},{"DOI":"10.4028\/0-87849-442-1.869","title":["FLR Geometry Dependence of Breakdown Voltage Characteristics for JBS-Assisted FLR SiC-SBD"]},{"DOI":"10.4028\/3-908451-31-0.279","title":["Nickel-Based Germanosilicide of Heavily-Doped SiGe Films for Low Resistance and High-Temperature Stability"]},{"DOI":"10.4028\/0-87849-974-1.447","title":["Study on Ultrasonic Vibration Drilling of Particulate Reinforced Aluminum Matrix Composites"]},{"DOI":"10.4028\/0-87849-410-3.1248","title":["Microstructure of C<sub>f<\/sub>\/SiC Composite with Precursor of Hexamethyldisilazane by Chemical Vapor Infiltration"]},{"DOI":"10.4028\/0-87849-457-x.1055","title":["Regulation of Osteoblast-Like Cell Behaviors on Hydroxyapatite by Electrical Polarization"]},{"DOI":"10.4028\/0-87849-459-6.484","title":["Fractal Tool-Path Planning for Free-Form Surface Polishing System"]},{"DOI":"10.4028\/3-908158-12-5.199","title":["Nanostructured Sol-Gel Coatings for Optical Applications"]},{"DOI":"10.4028\/0-87849-975-x.639","title":["Characteristics of Hot Compressed Magnesium Alloy AZ31 with Initial Textures Analyzed by Orientation Mapping"]},{"DOI":"10.4028\/0-87849-456-1.3080","title":["Experimental Analysis of Chemical Damage of Water to Soil Structure"]},{"DOI":"10.4028\/0-87849-991-1.199","title":["Solidification of AlSi Alloys in the ARTEMIS and ARTEX Facilities Including Rotating Magnetic Fields \u2013 A Combined Experimental and Numerical Analysis"]},{"DOI":"10.4028\/0-87849-410-3.1225","title":["Preparation of ZnSe by CVD with the Solid Starting Materials"]},{"DOI":"10.4028\/3-908451-09-4.357","title":["Texture Evolution in Commercially Pure Al during Equal Channel Angular Extrusion (ECAE) as a Function of Processing Routes"]},{"DOI":"10.4028\/0-87849-439-1","title":["Nitrides and Oxynitrides III"]},{"DOI":"10.1109\/icee.2008.4585109","title":["Low Complexity Global Motion Estimation Techniques for Image Stabilization"]},{"DOI":"10.1109\/apcc.2009.5375672","title":["Power allocation with relay selection based on stochastic game"]},{"DOI":"10.50505\/abtest","title":["Multiple Resolution Sample Article"]},{"DOI":"10.4028\/0-87849-436-7.849","title":["Comparison of a PGA Sheet with a Commercial ePTFE Sheet as a Staple-Line Reinforcement in Lung Surgery"]},{"DOI":"10.4028\/0-87849-457-x.1219","title":["Biodegradable Chitosan-Silicate Porous Hybrids for Drug Delivery"]},{"DOI":"10.4028\/0-87849-410-3.231","title":["Stability of the Perovskite Structure in BSPT-Based Ferroelectric Ceramics"]},{"DOI":"10.4028\/0-87849-960-1.265","title":["An Investigation of a Nitrogen Enhanced Steel Processed by Explosive Powder Compaction"]},{"DOI":"10.4028\/0-87849-429-4.339","title":["Analysis of Complex Heat Flow Phenomena with Friction Stir Welding Using 3D-Analytical Model"]},{"DOI":"10.4028\/0-87849-415-4.1789","title":["Inspecting Carbon Matrix Composites with Airborne\/Conventional Ultrasound"]},{"DOI":"10.4028\/0-87849-463-4.349","title":["Evaluation of the Influence of Additives on the Mechanical Properties and Photo-Stability of Glass Fiber Reinforced Epoxy Pipes Using Central Composite Design"]},{"DOI":"10.4028\/3-908451-46-9.295","title":["A Study on Water-Mark Defects in Copper\/Low-k Chemical Mechanical Polishing"]},{"DOI":"10.4028\/3-908451-17-5.47","title":["Atomistic Simulation of Pipe Diffusion in AlCu Alloys"]},{"DOI":"10.4028\/0-87849-432-4.1027","title":["The Effects of Thermo-Mechanical Treatment on the Properties of 2519 Aluminum Alloy"]},{"DOI":"10.1109\/cacsd.2006.285520","title":["A Rapid Calibration? Tool for Engine Control Software and its Application to Misfire Diagnosis Functions"]},{"DOI":"10.4028\/0-87849-425-1.1505","title":["Improved Structural Quality and Carrier Decay Times in GaN Epitaxy on SiN and TiN Porous Network Templates"]},{"DOI":"10.4028\/0-87849-412-x.1389","title":["Influence of Anisotropic Materials on Stress Intensity Factor under Biaxial Stress Conditions"]},{"DOI":"10.4028\/3-908451-25-6.405","title":["Influences of Elastic Stress and Interfacial Kinetic Barrier on Phase Evolution Paths of Thin-Film Diffusion Couples"]},{"DOI":"10.4028\/0-87849-960-1.3855","title":["The Investigation of Microstructure of Pt\/Ti Explosive Clad Interface"]},{"DOI":"10.4028\/3-908451-30-2.331","title":["Laser-Induced High Local Temperature in Carbon Nanotube"]},{"DOI":"10.14400\/jdc.2014.12.10.501","title":["10.14400\/JDC.2014.12.10.501"]},{"DOI":"10.4028\/0-87849-999-7.269","title":["The Effects of Rare Earth on the Hot Pressing of Cu-Sn-TiH<sub>2<\/sub> Bonded Diamond Composites"]},{"DOI":"10.4028\/0-87849-992-x.355","title":["Sintering Effects on Mechanical Properties of Hydroxyapatite-Titanium Dioxide (HA-TiO<sub>2<\/sub>) Composites"]},{"DOI":"10.4028\/0-87849-456-1.2061","title":["A Representative Stress Model Removing Weld Joint Type Dependency of S-N Curve"]},{"DOI":"10.4028\/0-87849-990-3.379","title":["Abbe Error-Free Test Equipment for Nanometer-Order Measurements"]},{"DOI":"10.4028\/0-87849-972-5.109","title":["Manufacturing of High Strength Steel and Aluminum for a Mixed Material Body in White"]},{"DOI":"10.4028\/0-87849-959-8.1369","title":["Synthesis of High Purity Ti<sub>3<\/sub>AlC<sub>2<\/sub> Bulk Material by Hot-Pressing"]},{"DOI":"10.1109\/icee.2008.4585296","title":["A Wavelet Interlaced Video Coding Framework"]},{"DOI":"10.5555\/3m45wsqhcy","title":["POSI fan tutte"]},{"DOI":"10.4028\/0-87849-960-1.2527","title":["Centrifugal Casting Practice and Microstructure and Mechanical Properties of a 2205 Duplex Stainless Steel"]},{"DOI":"10.4028\/0-87849-412-x.1177","title":["Studies about the Influence Factors on Ultrasonic Velocity of Domestic Red Pine"]},{"DOI":"10.4028\/0-87849-961-x.461","title":["In Vitro Analysis of Protein Adhesion to Phase Pure Hydroxyapatite and Silicon Substituted Hydroxyapatite"]},{"DOI":"10.4028\/3-908451-30-2.1473","title":["Design Research of Nanopositioner Based on SPM and Its Simulation of FEM"]},{"DOI":"10.1109\/icee.2008.4585140","title":["Wavelet Based Multiscale Edge Preserving Segmentation Algorithm for Object Recognition and Object Tracking"]},{"DOI":"10.4028\/3-908158-01-x.787","title":["In Situ and Ex Situ Characterization of PFSA-Inorganic Inclusion Composites for Medium Temperature PEM Fuel Cells"]},{"DOI":"10.4028\/0-87849-457-x.1269","title":["Stimulatory Effect on Osseous Repair of Zinc-Substituted Hydroxyapatite: Histological Study in Rabbit\u2019s Tibia"]},{"DOI":"10.4028\/0-87849-440-5.1503","title":["Comparative Studies of Tensile Strength on Polyester Resin Matrix Composites with Planar and Random Orientation Fibers"]},{"DOI":"10.4028\/0-87849-470-7.317","title":["The Tooth Profile Modification in Gear Manufacture"]},{"DOI":"10.4028\/0-87849-470-7.631","title":["A Finite Element Analysis of Micro\/Meso-Scale Machining Considering the Cutting Edge Radius"]},{"DOI":"10.4028\/0-87849-431-6.881","title":["Synthesis of Precipitated Calcium Carbonate Using a Limestone and its Application in Paper Filler and Coating Color"]},{"DOI":"10.4028\/0-87849-426-x.355","title":["Evolution of Special Grain Boundaries in Austenitic Steels"]},{"DOI":"10.4028\/0-87849-968-7.491","title":["Hydrostatic and Indirect Extrusion of AZ-Magnesium Alloys"]},{"DOI":"10.2172\/6301373","title":["Columbia River Basin Fish and Wildlife Program Annual Implementation Work Plan for fiscal year 1991"]},{"DOI":"10.4028\/0-87849-989-x.363","title":["Delamination Growth in Ball Grid Array Electronic Package"]},{"DOI":"10.4028\/0-87849-431-6.475","title":["Study on the Oxidation and Electrical Resistivity of Reaction-Bonded Silicon Carbide at High Temperature"]},{"DOI":"10.4028\/0-87849-977-6.515","title":["Detection of Vortex Frequency in Gas Flow with Ultrasound"]},{"DOI":"10.4028\/0-87849-411-1.109","title":["Evaluation of Planar-Type Thin Film ZnO Varistors Fabricated Using Pulsed Laser Ablation"]},{"DOI":"10.4028\/0-87849-414-6.807","title":["Evaluation of Deformation Behavior in Cu Thin Film under Tensile and Fatigue Loading by X-Ray Method"]},{"DOI":"10.4028\/3-908451-30-2.521","title":["Ambipolar Transport Behaviors in Fullerene Peapod Transistors"]},{"DOI":"10.4028\/0-87849-989-x.181","title":["Super Long Life Fatigue of AE42 and AM60 Magnesium Alloys"]},{"DOI":"10.5555\/books-form-sample-chapter-all-fields","title":["Are black cats better than other cats: a very comprehensive study"]},{"DOI":"10.1109\/eumc.1997.633727","title":["Active Wideband Antenna With Circular Polarization"]},{"DOI":"10.4028\/0-87849-422-7.169","title":["Preparation and Properties of Porous Apatite-Wollastonite Bioactive Glass-Ceramic"]},{"DOI":"10.1109\/dac.2007.375191","title":["Modeling Safe Operating Area in Hardware Description Languages"]},{"DOI":"10.5555\/testtestfeb2015abc","title":["article feb 18 test 2"]},{"DOI":"10.4028\/0-87849-975-x.1007","title":["A Dislocation Density Based Constitutive Model for Crystal Plasticity FEM"]},{"DOI":"10.4028\/0-87849-456-1.1229","title":["Viscoelastic Deformation of PC\/ABS Alloy"]},{"DOI":"10.4028\/0-87849-456-1.687","title":["Study on Cavity Growth in Uniaxial Tension of ZK60 Magnesium Alloy"]},{"DOI":"10.4028\/3-908451-51-5.132","title":["Experimental Values of Diffusion Coefficients of Organic Compounds in Water"]},{"DOI":"10.4028\/0-87849-422-7.1297","title":["Friction Characteristics of Poly(vinyl Alcohol) Hydrogel as an Articular Cartilage Biomaterial"]},{"DOI":"10.4028\/0-87849-428-6.1010","title":["Titanium Carbide Particulate Reinforced Titanium Based Composite by In Situ Process"]},{"DOI":"10.4028\/0-87849-409-x.417","title":["Exfoliation and Fracture Behavior of Oxide Films Formed on Titanium and Its Alloy in High Temperature Environments"]},{"DOI":"10.4028\/0-87849-982-2.49","title":["Preparation and Characterization of Barium Strontium Titanate Thin Films by Chemical Solution Deposition"]},{"DOI":"10.4028\/3-908451-49-3.153","title":["Effect of Dissolution on the Ni<sub>3<\/sub>Sn<sub>4<\/sub> Growth Kinetics at the Interface of Ni and Liquid Sn-Base Solders"]},{"DOI":"10.4028\/0-87849-411-1.235","title":["Effects of the Substitution of the B-Site Ion on Oxygen Reduction Electrode Properties of the Pyrochlore Pb<sub>2<\/sub>Ru<sub>2<\/sub>O<sub>7-\u03b4<\/sub> at Low Temperatures"]},{"DOI":"10.4028\/3-908158-16-8.198","title":["Smartflex NiTi Wires for Shape Memory Actuators"]},{"DOI":"10.4028\/0-87849-960-1.269","title":["Development of the SAW Wire for High Strength TMCP Steel"]},{"DOI":"10.4028\/0-87849-456-1.1489","title":["Microstructure and Mechanical Properties of 2D Tyranno SA\/SiC Composites by Hot Pressing"]},{"DOI":"10.4028\/0-87849-428-6.4386","title":["Advanced High Strength Steels for Automobile Body Structures"]},{"DOI":"10.4028\/0-87849-978-4.515","title":["Measuring Residual Stress with the Indentation Method in Struc\u00adtural Ceramics"]},{"DOI":"10.4028\/0-87849-440-5.307","title":["Crack Orientation Dependence for Fatigue Behavior of Magnesium Single Crystals"]},{"DOI":"10.4028\/0-87849-985-7.185","title":["Large Straining Behavior and Microstructure Refinement of Several Metals by Torsion Extrusion Process"]},{"DOI":"10.4028\/0-87849-423-5.715","title":["Characterization of Sludge after Thermal Treatment"]},{"DOI":"10.4028\/0-87849-440-5.29","title":["Sub-Grain Size and Hall-Petch Relation in Pure Copper Single Crystals"]},{"DOI":"10.4028\/0-87849-473-1.623","title":["Low Temperature Synthesis of BiFO<sub>3<\/sub> Film by Hydrothermal Method"]},{"DOI":"10.4028\/0-87849-427-8.629","title":["Numerical Simulation of the Crushing of Foam-Filled Aluminium Tubes"]}],"items-per-page":1000,"query":{"start-index":0,"search-terms":null}}}